Intended Use; Before First Use; Operation - Ideen Welt Rcy-91M Bedlenungsanleitung

INTENDED USE

This product is suitable for drying hair only. Any other use may result in damage to product or injuries.
This product is designed for household use only and not suitable for commercial use.

BEFORE FIRST USE

Remove the product and accessories carefully from the original packaging and inspect the delivery
contents for completeness and damages.

OPERATION

1. If needed connect either the concentrator nozzle or the diffuser attachment to the product. They
can rotate freely and help to achieve specific hair styles through the use of air pooling and
distribution.
Warning - Risk of burning!
The air outlet, concentrator nozzle and the diffuser attachment become very hot
during use.
2. Switch the product on by using the temperature switch and the airflow selection switch. Select the
required setting, see table below.
Setting
0
3. Press the cool shot button in order to interrupt the flow of warm air immediately and to blow out
cold air, e.g. to fix your hair with cold air.
4. When you release the cool shot button, warm air will be generated immediately if the temperature
switch has been set accordingly.
5. Always switch off the product after use and disconnect it from the mains supply.
6. The hair dryer is provided with an overheating protection. If the hair dryer becomes too hot it will
switch off automatically.
- If the overheating protection activates switch off (0) and unplug the hair dryer and allow the
product to cool down completely.
- Check the air inlet cover and remove hair and fluff if any.
- After sufficient cooling down period it should be possible to switch ON the hair dryer again.
RCY-91M_A5_141102.indb 13
Airflow strength
OFF
Middle
High
13
Setting Temperature
Low
Middle
High
2/11/14 9:04 AM