Battery Power Indicator - Durofix Rv2052-Wr8 Produktinformationen

1English1
(B)
(A)
Fig. 3
Install the Bit onto the Hex. Shank
1. Pull out the sleeve as the Fig.4 (A)
2. Insert the bit into the hex. shank as Fig.4 (B), release the sleeve to fix the bit.
(B)
(A)
Fig.4
NOTE: The bit should be like as the spec. 9.5mm length in Fig.5. Otherwise the sleeve
cannot fit it.
Fig.5

Battery Power Indicator

Tool display screen shows battery level (see Fig.6 A) which also be checked on Battery
Indicator (see Fig.6 B).
1. One light ON: 30% remaining capacity.
2. Two lights ON: 60% remaining capacity.
3. All lights ON: 100% remaining capacity.
English
-9