VEVOR RM-60 Bedienungsanleitung Seite 7

The default state is "Accumulated AVG Value", and if there is no
operation for 50s, it will automatically switch to "Accumulated AVG".
(6)"Retest"
①Select the "Retest" on the main menu and short press the "
confirm.
②Short press the " " or the " " to choose "Yes" or "No" and confirm. If you
choose "Yes", it will return to the "Measure".
After the retest, the data of the previous test will be saved and the test
data will be reset.
(7)"Data"
Select the "Data" in the main menu, short press the "
select the data to be viewed.
"6h VAL": Represents the integrated radon concentration value in
every 6-hour interval.
①Select "History", and short press "
historical data. Each time a remeasurement is done, a historical data with a
number will be generated.
②Select "View", after pressing the "
select and view data up and down. Press the "
browsing.
③Select "Delete", short press the "
up. According to needs, you can select "Delete The Current Record",
"Delete All Records" and " Delete all But This ".
" ", a pop-up box will appear for secondary confirmation (if the number
of the historical record to be deleted is "1", that is, the historical record
currently being detected, then the measurement will start again).
(8)"Alarm"
It includes the modification of the alarm threshold for radon
concentration and the switch for alpha particle detection alert.
①Select "Alarm" and short press the "
②Short press the " " or the " " to select the alarm threshold for radon
" to switch different numbered
", short press the " " or the " " to
" and a deletion interface will pop
" to confirm.
- 6 -
" , and then
" again to exit data
After short pressing the
" to