Technical Specifications - Vevor Rm-60 Bedienungsanleitung

●This device provides the function of viewing radon concentration
gle record can view the data overview of up
historical records. The sin
to 504 days. It records once every 6 hours, and there are up to 10
sets of detection records.
●Automatically starts re-measuring when powered on, and can also be
manually re-measured.
●There is a countdown prompt for the first data update to make it more
intuitive to know when the data will be updated.
●In the screen-off state, it enters a low-power consumption mode. While
having ultra-long battery life, it can still perform normal data monitoring,
data recording and radon concentration alarm.
●Language: English
●The colored progress bar can indicate different color zones according to
the change of radon concentration value.
●Has calendar and clock functions. After shutdown, the clock can operate
normally.

5.Technical specifications

●Sensor: Semiconductor radon sensor
●Measurement range: 3.3Bq/m³ - 37kBq/m³ (0.09pCi/L - 1000pCi/L)
●Measurement accuracy: ±15%
●Time for first data display: 6 hours
●Reliable data measurement time: 6 hours later (when radon
concentration is higher than 190Bq/m³); 12 hours later(when radon
concentration is 94-190Bq/m³); 24 hours later(when radon concentration is
lower than 94Bq/m³).
●Data update time: 60 minutes
●Battery life: 45 days (in screen-off state)
●Charging interface: TYPE-C interface (green light is on continuously
when charging, turns off when fully charged)
●Charging time: About 3.5 hours to fully charge (in shutdown state)
●Alarm time: Sounds for 20s every hour after exceeding the limit.
●Size and weight: 119*53*24mm, about 130g.
●Battery capacity: 2000mAh.
- 4 -