Accessories - Homcom C30-043V00 Bedienungsanleitung

EN Motorcycle Front/Rear Stand

Accessories

① 1PC x Rear handle frame
② 1PC x Front handle frame
③ 4PCS x Frame for wheels
④ 4SETS x M8 Screw, washer and locknut set
⑤ 8PCS x Black Wheel
⑥ 4SETS x M10 Screw, washer and locknut set
⑦ 4PCS x Screw with plastic topper
⑧ 8PCS x Clamping piece
⑨ 2PCS x Front adaptor
⑩ 2PCS x Fork adaptor
⑪ 2PCS x Paddle adaptor
Assembly instructions
Step 1: Assemble the wheels ⑤ on both sides of the frame and then insert both pieces of
frames with wheels ③ in to front handle frame ② and rear handle frame①.
Step 2: Push M8 screws through the holes of clamping pieces ⑧ and frame, make sure
that the connecting part are covered with clamping pieces on both sides. Then add
washers and use tools to tighten with the locknuts.
Step 2: Loose both sides screws ⑦ on the top of the frame with wheels, insert the front
adaptors ⑨ with front stand (smaller one) , and insert paddle adaptors ⑪ or fork
adaptors ⑩ with rear stand (bigger one).
2