Herunterladen Inhalt Inhalt
Teilen
Diese Seite drucken
VEVOR YL-PB-010-XL Bedienungsanleitung
  1. Anleitungen
  2. Marken
  3. VEVOR Anleitungen
  4. Tierbedarf
  5. YL-PB-010-XL
  6. Bedienungsanleitung
VEVOR YL-PB-010-XL Bedienungsanleitung

VEVOR YL-PB-010-XL Bedienungsanleitung

Erhöhteshundebett
Vorschau ausblenden
Inhaltsverzeichnis

Quicklinks

Diese Anleitung herunterladen
ELEVATED DOG BED
MODEL: YL-PB-010-XL
https://youtu.be/52IWCI3cdrY
For A Smooth Assembly Experience:
Scan The Qr Code To Watch Our Step-By-Step Installation Guide.
(Our Bed Cover And Frame Feature A Precision-Fit Design To Prevent
Sagging — This Intentional Snugness Ensures Long-Term Stability And
Durability For Your Pet's Comfort.)
Inhaltsverzeichnis
loading

Verwandte Anleitungen für VEVOR YL-PB-010-XL

Inhaltszusammenfassung für VEVOR YL-PB-010-XL

  • Seite 1 ELEVATED DOG BED MODEL: YL-PB-010-XL https://youtu.be/52IWCI3cdrY For A Smooth Assembly Experience: Scan The Qr Code To Watch Our Step-By-Step Installation Guide. (Our Bed Cover And Frame Feature A Precision-Fit Design To Prevent Sagging — This Intentional Snugness Ensures Long-Term Stability And...
  • Seite 2 MODEL: YL-PB-010-XL This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
  • Seite 3 WARNING: Please read this manual carefully before using the product. Failure to do so may result in serious injury. Please read and observe carefully all the assembly instructions before beginning assembly. Unit should be assembled by two or more people. Please do not let your child climb on the product.If you have kids or animals who like to climb, we highly recommend using the wall anchors and brackets/straps...

  • Seite 4: Use Precautions

    3. Use only on a flat, hard and smooth surface capable of safely supporting a fully loaded Elevated Dog Bed. 4. Use as intended only. Inspect before every use; do not use if parts are loose or damaged. TECHNICAL SPECIFICATIONS Model YL-PB-010-XL Product Dimensions 1220*910*230mm (LxWxH) Net Weight About 4 kg *Products such as specifications, appearance, and design are subject to modification without prior notice.

  • Seite 5: Package Contents

    PACKAGE CONTENTS Not included) ASSEMBLY STEPS STEP 1 STEP 2 Place part F on a flat tabletop, Connect part A1 with A2, then make sure the bottom side is tightly connect with part C. facing up.
  • Seite 6 STEP 3 STEP 4 Tightly connect part C to the other Insert into part F. side. STEP 5 STEP 6 Repeat the same as step 5 on the Insert part B into F, then other side. connect with part C.
  • Seite 7 STEP 7 STEP 8 Adjust the bed to upright position. Connect part E1 with E2, then Pull F upwards ensure a smooth tightly connect with part D. finish. STEP 9 STEP 10 Recommend using a rubber Vertically insert components hammer to secure part D into B. from step7 into part B, pull part B outwards if necessary.
  • Seite 8 STEP 11 STEP 12 Recommend using a rubber hammer Recommend placing the bed on to secure part B into D. Pull F the floor, then insert B into D for upwards ensure a smooth finish. both sides. STEP 13 STEP 14 Vertically insert components from Connect part E1 with E2, then step 13 into part B, pull part B...
  • Seite 9 STEP 15 STEP 16 Insert B into D for both sides. Recommend using a rubber hammer to secure part B into D.Pull F upwards ensure a smooth finish. STEP 17 STEP 18 Vertically insert components from Connect part Al with A2, then tightly step 17 into part B.
  • Seite 10 STEP 19 STEP 20 Tightly connect part C to the other Tightly connect part C with B. side. STEP 21 STEP 22 In order to ensure that all the Insert part G into E1, E2. components of the bed are closely joined together, this step requires considerable force...
  • Seite 11 COMPLETION Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX E-CrossStu GmbH...
  • Seite 13 LIT SURÉLEVÉ POUR CHIEN MODÈLE : YL-PB-010-XL https://youtu.be/52IWCI3cdrY Pour un montage en douceur : scannez le code QR pour accéder à notre guide d'installation étape par étape. (Notre housse et notre cadre de lit sont conçus avec précision pour éviter tout affaissement.
  • Seite 15 MODÈLE : YL-PB-010-XL Ceci est le mode d'emploi d'origine. Veuillez lire attentivement l'intégralité du manuel avant utilisation. VEVOR se réserve le droit d'interpréter clairement ce manuel d'utilisation. L'apparence du produit dépend du produit que vous avez reçu. Veuillez nous excuser pour les éventuelles...

  • Seite 16: Précautions De Montage

    AVERTISSEMENT: Veuillez lire attentivement ce manuel avant d'utiliser le produit. Le non-respect de ces instructions peut entraîner des blessures graves. Please read and observe carefully all the assembly instructions before beginning assembly. Unit should be assembled by two or more people. Please do not let your child climb on the product.If you have kids or animals who like to climb, we highly recommend using the wall anchors and brackets/straps...

  • Seite 17: Précautions D'emploi

    8. Utiliser uniquement comme prévu. Inspecter avant chaque utilisation ; ne pas utiliser si des pièces sont desserrées ou endommagées. TECHNICAL SPECIFICATIONS Modèle YL-PB-010-XL Dimensions du produit 1220*910*230 mm (LxlxH) Poids net Environ 4 kg *Les produits tels que les spécifications, l'apparence et la conception...

  • Seite 18: Package Contents

    sont sujets à modification sans préavis. PACKAGE CONTENTS Not included) ASSEMBLY STEPS ÉTAPE 1 ÉTAPE 2 Place part F on a flat tabletop, Connect part A1 with A2, then make sure the bottom side is tightly connect with part C. facing up.
  • Seite 19 ÉTAPE 3 ÉTAPE 4 Tightly connect part C to the other Insert into part F. side. ÉTAPE 5 ÉTAPE 6 Repeat the same as step 5 on the Insert part B into F, then other side. connect with part C.
  • Seite 20 ÉTAPE 7 ÉTAPE 8 Adjust the bed to upright position. Connect part E1 with E2, then Pull F upwards ensure a smooth tightly connect with part D. finish. ÉTAPE 9 ÉTAPE 10 Recommend using a rubber Vertically insert components hammer to secure part D into B. from step7 into part B, pull part B outwards if necessary.
  • Seite 21 ÉTAPE 11 ÉTAPE 12 Recommend using a rubber hammer Recommend placing the bed on to secure part B into D. Pull F the floor, then insert B into D for upwards ensure a smooth finish. both sides. ÉTAPE 13 ÉTAPE 14 Vertically insert components from Connect part E1 with E2, then step 13 into part B, pull part B...
  • Seite 22 ÉTAPE 15 ÉTAPE 16 Insert B into D for both sides. Recommend using a rubber hammer to secure part B into D.Pull F upwards ensure a smooth finish. ÉTAPE 17 ÉTAPE 18 Vertically insert components from Connect part Al with A2, then tightly step 17 into part B.
  • Seite 23 ÉTAPE 19 ÉTAPE 20 Tightly connect part C to the other Tightly connect part C with B. side. ÉTAPE 21 ÉTAPE 22 In order to ensure that all the Insert part G into E1, E2. components of the bed are closely joined together, this step requires considerable force...
  • Seite 24 COMPLETION Fabricant : Shanghaimuxinmuyeyouxiangongsi Adresse : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200 000 CN. Importé en Australie : SIHAO PTY LTD. 1 ROKEVA STREET, ASTWOOD NSW 2122 Australie Importé aux États-Unis : Sanven Technology Ltd. Suite 250, 9166 Anaheim Lieu, Rancho Cucamonga, CA 91730...
  • Seite 25 YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
  • Seite 27 ERHÖHTES HUNDEBETT MODELL: YL-PB-010-XL https://youtu.be/52IWCI3cdrY Für eine reibungslose Montage: Scannen QR-Code, unsere Schritt-für-Schritt-Installationsanleitung anzuzeigen. (Unsere Bettdecke und unser Rahmen verfügen über ein passgenaues Design, um ein Durchhängen zu verhindern – diese bewusste Passform...
  • Seite 28 gewährleistet langfristige Stabilität und Haltbarkeit für den Komfort Ihres Haustieres.)
  • Seite 29 MODELL: YL-PB-010-XL Dies ist die Originalanleitung. Bitte lesen Sie alle Anweisungen sorgfältig durch, bevor Sie das Gerät in Betrieb nehmen. VEVOR behält sich das Recht vor , die Bedienungsanleitung klar und deutlich zu interpretieren. Das Aussehen des Produkts hängt vom gelieferten Produkt ab. Bitte haben Sie Verständnis dafür, dass wir Sie nicht erneut über Technologie-...
  • Seite 30 WARNUNG: Bitte lesen Sie dieses Handbuch vor der Verwendung des Produkts sorgfältig durch. Andernfalls kann es zu schweren Verletzungen kommen. Please read and observe carefully all the assembly instructions before beginning assembly. Unit should be assembled by two or more people. Please do not let your child climb on the product.If you have kids or animals who like to climb, we highly recommend using the wall anchors and brackets/straps...

  • Seite 31: Bewahren Sie Diese Anweisungen Auf

    fern. 21. Montieren Sie nicht, wenn Sie müde sind oder unter dem Einfluss von Alkohol, Drogen oder Medikamenten stehen. 22. Die Produkteigenschaften gelten nur für ordnungsgemäß und vollständig montierte Produkte. 23. Montieren Sie es auf einer flachen, ebenen, harten und glatten Oberfläche, auf der das erhöhte Hundebett sicher stehen kann.

  • Seite 32: Package Contents

    Modell YL-PB-010-XL Technische Daten 1220*910*230 mm (L x B x H) Nettogewicht Etwa 4 kg *Produktspezifikationen, Aussehen und Design können ohne vorherige Ankündigung geändert werden. PACKAGE CONTENTS Not included) ASSEMBLY STEPS SCHRITT 1 SCHRITT 2...
  • Seite 33 Place part F on a flat tabletop, Connect part A1 with A2, then make sure the bottom side is tightly connect with part C. facing up. SCHRITT 3 SCHRITT 4 Tightly connect part C to the other Insert into part F. side.
  • Seite 34 Repeat the same as step 5 on the Insert part B into F, then other side. connect with part C. SCHRITT 7 SCHRITT 8 Adjust the bed to upright position. Connect part E1 with E2, then Pull F upwards ensure a smooth tightly connect with part D.
  • Seite 35 Recommend using a rubber Vertically insert components hammer to secure part D into B. from step7 into part B, pull part B outwards if necessary. SCHRITT 11 SCHRITT 12 Recommend using a rubber hammer Recommend placing the bed on to secure part B into D. Pull F the floor, then insert B into D for upwards ensure a smooth finish.
  • Seite 36 SCHRITT 13 SCHRITT 14 Vertically insert components from Connect part E1 with E2, then step 13 into part B, pull part B tightly connect with part D. outwards if necessary. SCHRITT 15 SCHRITT 16 Insert B into D for both sides. Recommend using a rubber hammer to secure part B into D.Pull F upwards ensure a smooth finish.
  • Seite 37 SCHRITT 17 SCHRITT 18 Vertically insert components from Connect part Al with A2, then tightly step 17 into part B. connect with part C SCHRITT 19 SCHRITT 20 Tightly connect part C to the other Tightly connect part C with B. side.
  • Seite 38 SCHRITT 21 SCHRITT 22 In order to ensure that all the Insert part G into E1, E2. components of the bed are closely joined together, this step requires considerable force connect component C tightly with component B. This is normal. For details, please COMPLETION scan the QR code for the video.
  • Seite 39 Hersteller: Shanghaimuxinmuyeyouxiangongsi Adresse: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200.000 CN. Importiert nach AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien Importiert in die USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX E-CrossStu GmbH...
  • Seite 41 LETTO RIALZATO PER CANI MODELLO: YL-PB-010-XL https://youtu.be/52IWCI3cdrY Per un montaggio senza intoppi: scansiona il codice QR per guardare la nostra guida all'installazione passo passo. (La nostra coperta e la struttura del letto presentano un design di precisione per evitare cedimenti: questa aderenza intenzionale garantisce...
  • Seite 43 MODELLO: YL-PB-010-XL Queste sono le istruzioni originali, si prega di leggere attentamente tutte le istruzioni del manuale prima di utilizzare il prodotto. VEVOR si riserva la piena interpretazione del manuale utente. L'aspetto del prodotto dipenderà dal prodotto ricevuto. Vi preghiamo di non informarvi ulteriormente in caso di aggiornamenti tecnologici o software relativi al nostro prodotto.

  • Seite 44: Precauzioni Di Montaggio

    AVVERTIMENTO: Si prega di leggere attentamente questo manuale prima di utilizzare il prodotto. La mancata osservanza di questa indicazione può causare lesioni gravi. Please read and observe carefully all the assembly instructions before beginning assembly. Unit should be assembled by two or more people. Please do not let your child climb on the product.If you have kids or animals who like to climb, we highly recommend using the wall anchors and brackets/straps...

  • Seite 45: Conservare Queste Istruzioni

    16. Utilizzare solo come previsto. Ispezionare prima di ogni utilizzo; non utilizzare se parti allentate o danneggiate. TECHNICAL SPECIFICATIONS Modello YL-PB-010-XL Dimensioni del prodotto 1220*910*230 (LxPxA) millimetri Peso netto...

  • Seite 46: Package Contents

    *Specifiche, aspetto e design dei prodotti sono soggetti a modifiche senza preavviso. PACKAGE CONTENTS Not included) ASSEMBLY STEPS PASSO 1 PASSO 2 Place part F on a flat tabletop, Connect part A1 with A2, then make sure the bottom side is tightly connect with part C.
  • Seite 47 PASSO 3 PASSO 4 Tightly connect part C to the other Insert into part F. side. PASSO 5 PASSO 6 Repeat the same as step 5 on the Insert part B into F, then other side. connect with part C.
  • Seite 48 PASSO 7 PASSO 8 Adjust the bed to upright position. Connect part E1 with E2, then Pull F upwards ensure a smooth tightly connect with part D. finish. PASSO 9 PASSO 10 Recommend using a rubber Vertically insert components hammer to secure part D into B. from step7 into part B, pull part B outwards if necessary.
  • Seite 49 PASSO 11 PASSO 12 Recommend using a rubber hammer Recommend placing the bed on to secure part B into D. Pull F the floor, then insert B into D for upwards ensure a smooth finish. both sides. PASSO 13 PASSO 14 Vertically insert components from Connect part E1 with E2, then step 13 into part B, pull part B...
  • Seite 50 PASSO 15 PASSO 16 Insert B into D for both sides. Recommend using a rubber hammer to secure part B into D.Pull F upwards ensure a smooth finish. PASSO 17 PASSO 18 Vertically insert components from Connect part Al with A2, then tightly step 17 into part B.
  • Seite 51 PASSO 19 PASSO 20 Tightly connect part C to the other Tightly connect part C with B. side. PASSO 21 PASSO 22 In order to ensure that all the Insert part G into E1, E2. components of the bed are closely joined together, this step requires considerable force...
  • Seite 52 COMPLETION Produttore: Shanghaimuxinmuyeyouxiangongsi Indirizzo: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD Nuovo Galles del Sud 2122 Australia Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Luogo, Rancho Cucamonga, CA 91730...
  • Seite 53 YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
  • Seite 55 CAMA ELEVADA PARA PERROS MODELO: YL-PB-010-XL https://youtu.be/52IWCI3cdrY Para un montaje sin complicaciones: Escanee el código QR para ver nuestra guía de instalación paso a paso. (Nuestra funda y estructura de cama cuentan con un diseño de ajuste preciso para evitar que se deformen. Este ajuste intencional garantiza...
  • Seite 56 MODELO: YL-PB-010-XL Estas son las instrucciones originales; lea atentamente todas las instrucciones del manual antes de utilizarlo. VEVOR se reserva el derecho de interpretar su manual de usuario. La apariencia del producto dependerá del producto que haya recibido. Le rogamos que no le informemos si hay actualizaciones tecnológicas o de software en nuestro...

  • Seite 57: Precauciones De Montaje

    ADVERTENCIA: Lea este manual detenidamente antes de utilizar el producto. De lo contrario, podría sufrir lesiones graves. Please read and observe carefully all the assembly instructions before beginning assembly. Unit should be assembled by two or more people. Please do not let your child climb on the product.If you have kids or animals who like to climb, we highly recommend using the wall anchors and brackets/straps that come with the package.

  • Seite 58: Precauciones De Uso

    20. Úselo solo según lo previsto. Inspeccione el producto antes de cada uso; no lo use si las piezas están sueltas o dañadas. TECHNICAL SPECIFICATIONS Modelo YL-PB-010-XL Dimensiones del 1220*910*230 producto milímetros (Largo x Ancho x Alto)

  • Seite 59: Package Contents

    *Los productos como especificaciones, apariencia y diseño están sujetos a modificaciones sin previo aviso. PACKAGE CONTENTS Not included) ASSEMBLY STEPS PASO 1 PASO 2 Place part F on a flat tabletop, Connect part A1 with A2, then make sure the bottom side is tightly connect with part C.
  • Seite 60 PASO 3 PASO 4 Tightly connect part C to the other Insert into part F. side. PASO 5 PASO 6 Repeat the same as step 5 on the Insert part B into F, then other side. connect with part C.
  • Seite 61 PASO 7 PASO 8 Adjust the bed to upright position. Connect part E1 with E2, then Pull F upwards ensure a smooth tightly connect with part D. finish. PASO 9 PASO 10 Recommend using a rubber Vertically insert components hammer to secure part D into B. from step7 into part B, pull part B outwards if necessary.
  • Seite 62 PASO 11 PASO 12 Recommend using a rubber hammer Recommend placing the bed on to secure part B into D. Pull F the floor, then insert B into D for upwards ensure a smooth finish. both sides. PASO 13 PASO 14 Vertically insert components from Connect part E1 with E2, then step 13 into part B, pull part B...
  • Seite 63 PASO 15 PASO 16 Insert B into D for both sides. Recommend using a rubber hammer to secure part B into D.Pull F upwards ensure a smooth finish. PASO 17 PASO 18 Vertically insert components from Connect part Al with A2, then tightly step 17 into part B.
  • Seite 64 PASO 19 PASO 20 Tightly connect part C to the other Tightly connect part C with B. side. PASO 21 PASO 22 In order to ensure that all the Insert part G into E1, E2. components of the bed are closely joined together, this step requires considerable force...
  • Seite 65 COMPLETION Fabricante: Shanghaimuxinmuyeyouxiangongsi Dirección: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghái 200000 CN. Importado a AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122 Australia Importado a EE. UU.: Sanven Technology Ltd. Suite 250, 9166 Anaheim Lugar, Rancho Cucamonga, CA 91730...
  • Seite 66 YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
  • Seite 68 PODWYŻSZONE LEGOWISKO DLA PSA MODELE: YL-PB-010-XL https://youtu.be/52IWCI3cdrY Aby zapewnić bezproblemowy montaż: zeskanuj kod QR, aby obejrzeć nasz przewodnik montażu krok po kroku. (Nasz pokrowiec na łóżko i rama charakteryzują się precyzyjnie dopasowaną konstrukcją, która zapobiega ich zwisaniu — to celowe dopasowanie gwarantuje długoterminową...
  • Seite 70 Elevated Dog Bed MODELE: YL-PB-010-XL To jest oryginalna instrukcja, przed użyciem należy uważnie przeczytać wszystkie instrukcje. VEVOR zastrzega sobie jasną interpretację naszej instrukcji obsługi. Wygląd produktu będzie zależał od produktu, który otrzymałeś. Prosimy o wybaczenie, że nie poinformujemy Cię ponownie, jeśli w naszym produkcie pojawią...
  • Seite 71 OSTRZEŻENIE: Przed użyciem produktu należy uważnie przeczytać tę instrukcję. Nieprzestrzeganie jej może skutkować poważnymi obrażeniami. Please read and observe carefully all the assembly instructions before beginning assembly. Unit should be assembled by two or more people. Please do not let your child climb on the product.If you have kids or animals who like to climb, we highly recommend using the wall anchors and brackets/straps that come with the package.

  • Seite 72: Środki Ostrożności

    23. Stosować wyłącznie na płaskiej, twardej i gładkiej powierzchni, która może bezpiecznie utrzymać w pełni załadowane podwyższone legowisko dla psa. 24. Stosować wyłącznie zgodnie z przeznaczeniem. Przed każdym użyciem sprawdzić; nie używać, jeśli części są luźne lub uszkodzone. TECHNICAL SPECIFICATIONS Model YL-PB-010-XL...

  • Seite 73: Package Contents

    Wymiary produktu Wymiary: (Dł. x Szer. x Wys.) 1220*910*230 mm Masa netto Około 4 kg *Specyfikacja, wygląd i konstrukcja produktu mogą ulec zmianie bez wcześniejszego powiadomienia. PACKAGE CONTENTS Not included) ASSEMBLY STEPS KROK 1 KROK 2 Place part F on a flat tabletop, Connect part A1 with A2, then make sure the bottom side is tightly connect with part C.
  • Seite 74 KROK 3 KROK 4 Tightly connect part C to the other Insert into part F. side. KROK 5 KROK 6...
  • Seite 75 Repeat the same as step 5 on the Insert part B into F, then other side. connect with part C. KROK 7 KROK 8 Adjust the bed to upright position. Connect part E1 with E2, then Pull F upwards ensure a smooth tightly connect with part D.
  • Seite 76 Recommend using a rubber Vertically insert components hammer to secure part D into B. from step7 into part B, pull part B outwards if necessary. KROK 11 KROK 12 Recommend using a rubber hammer Recommend placing the bed on to secure part B into D. Pull F the floor, then insert B into D for upwards ensure a smooth finish.
  • Seite 77 KROK 13 KROK 14 Vertically insert components from Connect part E1 with E2, then step 13 into part B, pull part B tightly connect with part D. outwards if necessary. KROK 15 KROK 16 Insert B into D for both sides. Recommend using a rubber hammer to secure part B into D.Pull F upwards ensure a smooth finish.
  • Seite 78 KROK 17 KROK 18 Vertically insert components from Connect part Al with A2, then tightly step 17 into part B. connect with part C KROK 19 KROK 20 Tightly connect part C to the other Tightly connect part C with B. side.
  • Seite 79 KROK 21 KROK 22 In order to ensure that all the Insert part G into E1, E2. components of the bed are closely joined together, this step requires considerable force connect component C tightly with component B. This is normal. For details, please COMPLETION scan the QR code for the video.
  • Seite 80 Producent: Shanghaimuxinmuyeyouxiangongsi Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Szanghaj 200000 CN. Importowane do AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Importowane do USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Miejsce, Rancho Cucamonga, CA 91730 YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX E-CrossStu GmbH...
  • Seite 82 VERHOOGD HONDENBED MODEL: YL-PB-010-XL https://youtu.be/52IWCI3cdrY Voor een soepele montage: scan de QR-code om onze stapsgewijze installatiehandleiding te bekijken. (Onze bedovertrek en het frame hebben een nauwkeurig passend ontwerp om doorzakken te voorkomen. Deze opzettelijke stevigheid garandeert langdurige stabiliteit en duurzaamheid voor het comfort van uw huisdier.)
  • Seite 83 MODEL: YL-PB-010-XL Dit is de originele handleiding. Lees alle instructies zorgvuldig door voordat u het product gebruikt. VEVOR behoudt zich het recht voor om de gebruiksaanwijzing duidelijk te interpreteren. Het uiterlijk van het product is afhankelijk van het product dat u hebt ontvangen. Neemt u het ons niet kwalijk dat we u niet meer op de hoogte stellen van eventuele technologische of software-updates voor ons product.
  • Seite 84 WAARSCHUWING: Lees deze handleiding zorgvuldig door voordat u het product gebruikt. Als u dit niet doet, kan dit leiden tot ernstig letsel. Please read and observe carefully all the assembly instructions before beginning assembly. Unit should be assembled by two or more people. Please do not let your child climb on the product.If you have kids or animals who like to climb, we highly recommend using the wall anchors and brackets/straps...

  • Seite 85: Technical Specifications

    28. Gebruik het product uitsluitend zoals bedoeld. Inspecteer het product voor elk gebruik; gebruik het niet als onderdelen los of beschadigd zijn. TECHNICAL SPECIFICATIONS Model YL-PB-010-XL Productafmetingen 1220*910*230 mm (LxBxH) Nettogewicht Ongeveer 4 kg...

  • Seite 86: Package Contents

    *Productspecificaties, uiterlijk en ontwerp kunnen zonder voorafgaande kennisgeving worden gewijzigd. PACKAGE CONTENTS Not included) ASSEMBLY STEPS STAP 1 STAP 2 Place part F on a flat tabletop, Connect part A1 with A2, then make sure the bottom side is tightly connect with part C. facing up.
  • Seite 87 STAP 3 STAP 4 Tightly connect part C to the other Insert into part F. side. STAP 5 STAP 6 Repeat the same as step 5 on the Insert part B into F, then other side. connect with part C.
  • Seite 88 STAP 7 STAP 8 Adjust the bed to upright position. Connect part E1 with E2, then Pull F upwards ensure a smooth tightly connect with part D. finish. STAP 9 STAP 10 Recommend using a rubber Vertically insert components hammer to secure part D into B. from step7 into part B, pull part B outwards if necessary.
  • Seite 89 STAP 11 STAP 12 Recommend using a rubber hammer Recommend placing the bed on to secure part B into D. Pull F the floor, then insert B into D for upwards ensure a smooth finish. both sides. STAP 13 STAP 14 Vertically insert components from Connect part E1 with E2, then step 13 into part B, pull part B...
  • Seite 90 STAP 15 STAP 16 Insert B into D for both sides. Recommend using a rubber hammer to secure part B into D.Pull F upwards ensure a smooth finish. STAP 17 STAP 18 Vertically insert components from Connect part Al with A2, then tightly step 17 into part B.
  • Seite 91 STAP 19 STAP 20 Tightly connect part C to the other Tightly connect part C with B. side. STAP 21 STAP 22 In order to ensure that all the Insert part G into E1, E2. components of the bed are closely joined together, this step requires considerable force...
  • Seite 92 COMPLETION Fabrikant: Shanghaimuxinmuyeyouxiangongsi Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Geïmporteerd naar AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australië Geïmporteerd naar de VS: Sanven Technology Ltd. Suite 250, 9166 Anaheim Plaats, Rancho Cucamonga, CA 91730...
  • Seite 93 YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
  • Seite 95 UPPHÖJD HUNDBÄDD MODELL: YL-PB-010-XL https://youtu.be/52IWCI3cdrY För en smidig monteringsupplevelse: Skanna QR-koden för att se vår steg-för-steg-installationsguide. (Vårt sängöverdrag och ram har en precisionsdesign för att förhindra att sängen hänger – denna avsiktliga åtsittning säkerställer långsiktig stabilitet och hållbarhet för ditt husdjurs komfort.)
  • Seite 96 MODELL: YL-PB-010-XL Detta är originalinstruktionerna, vänligen läs alla instruktioner noggrant innan du använder produkten. VEVOR förbehåller sig en tydlig tolkning av vår användarmanual. Produktens utseende ska vara beroende av den produkt du mottagit. Vi ber om ursäkt för att vi inte kommer att informera dig igen om det finns några teknik- eller programuppdateringar för vår...
  • Seite 97 VARNING: Läs noggrant igenom denna manual innan du använder produkten. Underlåtenhet att göra det kan leda till allvarliga skador. Please read and observe carefully all the assembly instructions before beginning assembly. Unit should be assembled by two or more people. Please do not let your child climb on the product.If you have kids or animals who like to climb, we highly recommend using the wall anchors and brackets/straps...
  • Seite 98 31. Använd endast på en plan, hård och slät yta som säkert kan bära en fullastad, upphöjd hundbädd. 32. Använd endast enligt avsikten. Kontrollera före varje användning; använd inte om delar är lösa eller skadade. TECHNICAL SPECIFICATIONS Modell YL-PB-010-XL Produktens mått 1220*910*230 mm (LxBxH) Nettovikt Cirka 4 kg...
  • Seite 99 *Produkter såsom specifikationer, utseende och design kan komma att ändras utan föregående meddelande. PACKAGE CONTENTS Not included) ASSEMBLY STEPS STEG 1 STEG 2 Place part F on a flat tabletop, Connect part A1 with A2, then make sure the bottom side is tightly connect with part C.
  • Seite 100 STEG 3 STEG 4 Tightly connect part C to the other Insert into part F. side. STEG 5 STEG 6 Repeat the same as step 5 on the Insert part B into F, then other side. connect with part C.
  • Seite 101 STEG 7 STEG 8 Adjust the bed to upright position. Connect part E1 with E2, then Pull F upwards ensure a smooth tightly connect with part D. finish. STEG 9 STEG 10 Recommend using a rubber Vertically insert components hammer to secure part D into B. from step7 into part B, pull part B outwards if necessary.
  • Seite 102 STEG 11 STEG 12 Recommend using a rubber hammer Recommend placing the bed on to secure part B into D. Pull F the floor, then insert B into D for upwards ensure a smooth finish. both sides. STEG 13 STEG 14 Vertically insert components from Connect part E1 with E2, then step 13 into part B, pull part B...
  • Seite 103 STEG 15 STEG 16 Insert B into D for both sides. Recommend using a rubber hammer to secure part B into D.Pull F upwards ensure a smooth finish. STEG 17 STEG 18 Vertically insert components from Connect part Al with A2, then tightly step 17 into part B.
  • Seite 104 STEG 19 STEG 20 Tightly connect part C to the other Tightly connect part C with B. side. STEG 21 STEG 22 In order to ensure that all the Insert part G into E1, E2. components of the bed are closely joined together, this step requires considerable force...
  • Seite 105 COMPLETION Tillverkare: Shanghaimuxinmuyeyouxiangongsi Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200 000 kanadensiska republiken. Importerad till Australien: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Plats, Rancho Cucamonga, Kalifornien 91730...
  • Seite 106 YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.

Inhaltsverzeichnis