Maintenance And Storage - Oracle Red Bull Racing Rb-Sk400 Bedienungsanleitung

11. Battery, tracks playing, and Easy Wireless Connection LED-light indicators: battery is fully charged when all white
lights are on. Recharge the device when the white lights turn off. When the battery is charging, the white lights are
flashing.
When playing music, the blue light will slowly flash. EASY WIRELESS CONNECTION light will start rapidly flashing green
when searching for devices and will turn blue when the connection is successful.
INSTRUCTIONS FOR USE
Charging the speaker
To charge the speaker's built-in battery, connect the Type C power adaptor to the charging port. The appliance can be
used when plugged in for recharging.
Connect your device
1. Long press the play/ pause switch to enable the EASY WIRELESS CONNECTION function.
2. Put your device (mobile phone, computer, etc.) in pairing mode, search for devices, and select RB-SK400 when it
pops up.
3. No password is required to perform this operation. Note: The product can connect to one Easy Wireless Connection
device at a time only.
USB Mode
Insert your USB card to directly play tracks from the card.
AUX Input Mode
Plug in an AUX cable to connect the speaker to other devices.
TF Card
Insert your TF card into the corresponding slot to start playing tracks from the cards directly.
TWS Function
1. Enable the Easy Wireless Connection on both speakers.
2. Double click the POWER button of either speaker to enter the TWS mode.
3. A voice prompt will notify that the two speakers are starting to pair.
4. Once the connection is successful, the secondary unit blue light remains on, and the host continues to research
until the connection is completed. When the connection is completed, the blue light of the auxiliary speaker
remains on, whereas the main speaker light flashes.
To note: if you hear an alarm sound coming from the device during the playback, it is recommended to connect the
charger and recharge the device.

MAINTENANCE AND STORAGE

First, make sure the charging cable is not plugged in. Secondly, the product must be turned off.
4