EDIFIER QS20 Bedienungsanleitung

Portable Bluetooth Speaker
EN
1. EDIFIER ConneX mobile app
With this app, you can
•Control play from the Bluetooth
source device,
•Control the master volume,
•Switch EQs,
•Select or customize light effects,
•Upgrade the firmware, and
•More functions.
Download EDIFIER ConneX app
1. With your smart device, scan the QR code on the quick start guide or the
packaging.
•You can also search for "EDIFIER ConneX" in Apple App Store (iOS devices) or
Google Play (Android devices).
2. Download and install the app.
How to use this app
1. Connect your smart device with the speaker via Bluetooth.
2. In Bluetooth mode, open EDIFIER ConneX App on your smart device.
3. Tap the menu for settings and playback control.
2. What's in the box?
USB-C to USB-C audio cable
Cleaning cloth
Note:
•Images are for illustrative purpose only and may differ from the actual product.
•For the need of technical improvement and system upgrade, information and
specifications contained herein may be slightly different from actual product. If
any difference is found, the actual product prevails.
3. Charging
5V
7-9
W
Note:
•Power input: 5 V
•"7" is the minimum power required by the radio equipment to charge.
"9" is the maximum power required by the radio equipment to achieve
maximum charging speed.
4. Power on/off
When the speaker is not under charging, it will automatically power off if there
are no audio playback and operation for 30 minutes.
This function is enabled by default. You can disable it in the menu of "Settings" →
"Power saving mode" on EDIFIER ConneX App.
5. Bluetooth connection
This speaker supports the simultaneous connection of two Bluetooth devices.
Connect to a device
1. If no device is connected, the speaker will auto-enter Bluetooth pairing mode
after powered on (LED blinking in blue). If not, press and hold the "+" and "-"
buttons for 1.5 seconds.
2. On your device, select "EDIFIER QS20" in its Bluetooth device list to connect,
and the blue LED will be steady lit when the connection is established.
•To disconnect from the current Bluetooth device, press and hold the "+" and "-"
buttons for 1.5 seconds.
Connect to two devices
1. Connect to a device, and then press and hold the "+" and "-" buttons for 1.5
seconds (LED blinking in blue).
2. On the second device, select "EDIFIER QS20" in its Bluetooth device list to
connect, and the blue LED will be steady lit when the connection is established.
3. On the first device, select "EDIFIER QS20" in its Bluetooth device list to reconnect.
•Pause or stop playback on the current Bluetooth device before streaming audio
from the second one.
Note:
•Pin code for connection is "0000" if needed.
•To enjoy all Bluetooth functions of this product, make sure that your audio
source device supports HFP, A2DP and AVRCP profiles.
•If no device is connected in 10 minutes, the speaker will switch to Bluetooth
hidden mode. The blue indicator will blink slowly. In this mode, (1) new devices
cannot find the speaker, but (2) for a device that exists in the pairing record of
this speaker, you can select "EDIFIER QS20" from its Bluetooth device list to
reconnect. To exit from Bluetooth hidden mode, press "
speaker.
•After powered on, the speaker will reconnect to the last connected devices
automatically.
6. Bluetooth stereo pairing
①
①
Pair two QS20 speakers to enjoy stereo sound.
1. Double press the "
breathing pattern.
2. Double press the "
breathing pattern.
• Once the connection is established, the blue LED on the first QS20 will be
steady lit or blink fast, and the white LED on the second QS20 will light off.
3. Connect the first QS20 to your Bluetooth device and start playing.
• To exit the stereo mode, double press the "
Note:
• The first QS20 will work as the master speaker. You can control play on the first
QS20.
• The first QS20 will deliver the right channel audio and the second one is for the
left channel audio.
7. Play control
8. Phone calls
9. Light effects
x1 ：
x2 ：
10. Specifications
Total output power (RMS): 6 W
Frequency response: 87 Hz~20 kHz
Declaration for EU
Frequency Band: 2.402 GHz ~ 2.480 GHz
RF Power Output: ≤13 dBm (EIRP)
There is no restriction of use.
11. Troubleshooting
Cannot connect to your Bluetooth device
•Make sure that the distance between this product and your Bluetooth device
is less than 10 meters and there are no obstacles between them.
•Make sure that no device is connected to this product via Bluetooth.
•Make sure that this product is in Bluetooth pairing mode. If not, manually
switch it to this mode.
•Restart this product, enable Bluetooth function on your Bluetooth device,
and then try again.
•Reset this product to factory settings and try again.
No sound
•Make sure that this product and your device is properly connected.
•Make sure that the correct audio input source is selected.
•Make sure that the playback is not paused.
•Increase the volume of this product and your device.
Noise coming from speakers
•EDIFIER speakers generate little noise, while the background noise of some
audio devices is too high. Please unplug audio cables and turn the volume
up. If no sound can be heard at 1 meter away from the speaker, there is no
problem with this product.
To learn more about EDIFIER, please visit www.edifier.com
For EDIFIER warranty queries, please visit the relevant country page on
www.edifier.com and review the section titled Warranty Terms.
USA and Canada: service@edifier.ca
South America: Please visit www.edifier.com (English) or
www.edifierla.com (Spanish/Portuguese) for local contact information.
Quick start guide
2A
2 A
x2
Settings
Bluetooth
DEVICES
EDIFIER QS20
" button on the first QS20. The white LED will be in
" button on the second QS20. The white LED will be in
x1
x1
：
QS20
Manual
Speaker
ON
Settings
Bluetooth
DEVICES
EDIFIER QS20
②
②
2:12
Bluetooth
x1
EDIFIER ConneX app
Strap
Important safety instructions
1.5s
OFF
1.5s
2:12
Bluetooth
" button on the
x2
" button.
x1