NOTE: The important safeguards and instructions that appear in this manual are
•
not meant to cover all possible conditions and situations that may occur. It must be
understood that common sense, caution and care, are factors that can't be built into
any product. These factors must be supplied by the person(s) caring for and
operating the product. Do not install this product in hazardous locations.
CHECK PRODUCT LIST AFTER
OPENING THE PACKAGE
• LED Lighted Mirror
• Screws for wall
• Type A Plastic Anchor
• Installation Manual
• Junction Box
INSTALLATION
1. Measure the distance of the hanging
hole.
3.Drill the holes and place the suitable
plastic anchors.
TOOLS YOU MAY NEED
x1
x2
x2
x1
x1
2.Mark the hole position on the wall.
4.Arrange the screws on the wall,
leaving about 3/8 inch outside the
wall, and make sure the screws are
stable.
2