Werbung
Verfügbare Sprachen
Verfügbare Sprachen
13. TROUBLESHOOTING
GB
Software crash
(receiver no
longer works)
The remote control
is not working.
The channel has
a new frequency and
is no longer being
broadcast with the
same channel infos.
I want to exit the
Favourites List.
Password
Forgot my
personal password,
Channel-List
Editor
Factory Settings
External USB storage
device is
not recognized.
If you still cannot resolve the issue, contact your dealer or the manufacturer.
Installation Guide
In the unlikely event of a software crash,
unplug the receiver from the power supply. Plug it
back in after 10 second. This will normally solve the problem.
Please note that a software crash is not a malfunction and
therefore is not covered by the warranty. Software crashes
on devices of this type (which also include PCs, wireless
networking equipment, etc.) are rectified quickly and easily
in this way.
The batteries are spent. Replace the batteries.
The remote control may also be incorrectly aligned. Try
pointing the remote control to the front panel of the receiver,
ensuring that there are no obstructions between the remote
control and the receiver.
Delete the channel and carry out an automatic
search.
Press FAV button or 1 on the keypad.
The default password is 0000.
Please contact the Sercice Hotline if you have
forgotten your personal password.
You can download the Channel-List
Editor at www.digitalbox.de.
To restore the factory settings, press and hold the standby
button on the front panel of your receiver for more than
10 seconds.
Warning! This will delete your personal settings.
Switch off the receiver at the mains switch.
Reconnect the USB storage device.
Reset the receiver to normal mode.
The common USB storage devices known to us are
compatible with this receiver. For larger USB drives,
use an external mains power supply and follow the
operating guidelines for the USB drive.
46
Werbung
