Digital Box IMPERIAL HD 2 basic Installationsanleitung Seite 25

8. USING THE RECEIVER
8.4 Navigating in the menus
The , , und . buttons are used to navigate in the menus. Selected menu items
are highlighted. Click OK to make your selection. Press EXIT to exit the menu. Changes
must also be confirmed. Certain changes will require you to acknowledge a confirmation
prompt.
Example: Setting the receiver to summer time
Press the MENU button, select System Settings, press OK, select Time & Timer Settings,
press OK,select Local Time Settings, press OK. Enable Use GMT using the or
Under GMT Difference, set the time zone according to your location (Germany: „GMT
+01:00"). Enable Summer Time using the or
8.5 Installation (symbol: sat antenna)
• Antenna Settings
Instructions for „Antennas with fixed installation" default setting
Satellite: Satellite selection. All satellites which are enabled in the Satellite List sub-
menu are listed here. Select the satellite you want to edit.
LNB Frequency: Set the corresponding LNB frequency for the selected satellite. The
default setting is universal.
LNB Power: LNB power can switch on/off
Transponder: List of available transponders
DiSEqC1.0: Setting for multiple satellite reception
22K: Automatically set by the receiver
Polarisation: Default setting is „AUTO". However, horizontal or vertical LNB supply
voltage can also be set.
Save changes: Yes: it will save the changes after exit
No: no saving
button. Press EXIT to exit the menu.
25
button.
DVB-S Receiver
GB