Isotronic Snailslug Gebrauchsanweisung Seite 20

Then pull the end cap off the fence holder and guide the snail fence
through the two slots and press the end cap back onto the holder (please
note the inside guide of the end cap).
When the entire fence is mounted on the brackets, it can be tightened
slightly from bracket to bracket and fixed to the bracket with two cable
ties.
Attention: It is not necessary to tension the fence strongly, as it remains
upright due to its inherent rigidity.
The internal contact connection of the conductor tracks from the snail
fence must be in the fence holder.
With the open system, the beginning and the end of the snail fence are
inserted into the holder on one side, wrapped once around the holder and
fixed with cable ties.
With the closed system, the side with the contact connection is inserted
on one side and the end of the snail fence is passed through the slot and