Product Operation; Remote Control Operation - Tectake 406081 Gebrauchsanleitung

PRODUCT OPERATION

-The bladeless fan will beep and the LED display will show "0" to enter the standby
mode.
-The fan has 8 speed levels.
The defauIt IeveI is IeveI 5 when the fan is turned on.
-The touch paneI has the function of turning the fan on/off and to adjust the speed.
-Press the button once to turn it on and keep pressing to adjust the speed.
-Press and hold for 3 seconds after turning on the fan. After hearing the beep, the fan
begins to rotate. Press it for 3 seconds to turn off the rotating
Press and hoId for 5 seconds to turn off. Wait for the second beep.

REMOTE CONTROL OPERATION

-ON/OFF: In standby mode, press the power button to turn on the fan. After pressing
the button again, the fan slows down and stops to enter the standby mode.
-Wind speed + : While the fan is on, press the wind speed
" + " button to increase the speed levels, the maximum level is 8.
-Wind speed - : While the fan is on, press the wind speed " - " button to decrease the
speed levels, the minimum level is 1.
-Oscillation: While the fan is on, press the oscillation button, the fan will start rotating
and press it again and the fan will stop rotating.
-Timing: While the fan is on, press the button to enter the timing mode. The LED dispIays
the corresponding timer in 1 hour intervals up to 9 hours. When the timer is activated, the
number will blink on the display to show the timer is on. To exit the timer, turn the unit on
and off.
-Strong Mode: Press the Strong Mode button and the fan will blow the air at the highest
speed also increasing the noise, it is recommended to use during the day.
Sleep mode: Press the sleep mode button and the fan will blow the air at a slow speed
also reducing the noise.
7