Switching On/Off - Standby; Menu Settings - Trevi Dab 7F80 R Gebrauchs- Und Anschlusshandbuch

ENGLISH
BATTERY RECHARGE
1. Speaker
2. MODE button
3. PRESET button
4. INFO/MENU button
5. SELECT/>II/SCAN button
6. button, down/back
7. button, On/Off
8. button, up/forward
9. Power on/standby indicator
10. Bluetooth indicator
11. Display
12. Headphone socket
13. 5V 1A power input
14. Volume knob
15. Telescopic antenna
16. Bass refl ex
17. Battery compartment
To avoid possible hearing damage, limit the
time listening at high volumes
AC/DC POWER SUPPLY
The device can also be operated using a USB 5V
wer supply (not supplied). Connect one end of the supplied
cable to the USB power supply and the other end to the 5V
1A power input (13).
BATTERIES POWER SUPPLY
Open the battery compartment (17) and insert 4 batteries size
"AA", paying attention to the polarities indicated.
8

SWITCHING ON/OFF - STANDBY

1. Extend the telescopic antenna (15);
2. Press and hold the
device;
3. When fi rst switched on, the radio will start up in DAB
mode and start the automatic search for available radio
stations;
4. Press the
mode and continue to view the time on the display.
Note: If the unit is running on batteries, in Standby mode
you will still consume enough batteries to reduce battery
charge faster.
5. Press and hold for 2 sec. the
Turn Off the appliance.
FUNCTION SELECTION AND VOLUME ADJUSTMENT
1. Press the MODE button (2) to switch between the DAB/
DAB+, FM and Bluetooth input;
2. Turn the VOLUME knob (14) to decrease or increase the
volume.

MENU SETTINGS

1. Press and hold the INFO/MENU button (4) for a few secon-
ds, the settings menu will appear on the display;
2. Press the (8) or (6) buttons to select the desired item;
3. Press SELECT/>II/SCAN button (5) to enter the settings of
the selected item.
The following items are available in the settings menu (some
are displayed depending on whether DAB or FM mode is
selected):
Scan (DAB): selecting this item automatically scans and
stores received radio stations.
Scan Setting (FM): allows you to search on FM stations with a
strong signal or on all stations found.
Manual tune (DAB): select the desired frequency/ channel
and confi rm with SELECT/>II/SCAN (5). A bar will show the
strength of the received signal.
Prune Invalid (DAB): allows you to delete from the list of
stored stations all the radios found but not available (poor
signal).
System: this item allows access to further settings.
Time/Date: allows you to set the current time/date.
Set Time/Date: set the current time and date.
Set Hour System: set the 12/24H time format.
Set Date Format: set the date format.
Auto Update: select from which source you
automatically set the time and date if available.
Backlight: allows you to set the time and brightness level
of the display:
Timeout: set the time after which the display
lowers the brightness without commands.
Level: indicates the brightness level of the
display when the appliance is inactive.
1A po-
DAB 7F80 R
button (7) for 2 sec. to turn on the
button (7) to put the device in Stand-by
button (7) to completely