Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Note: Make sure that there are no obstacles between the USB dongle and the wireless mouse to
ensure a stable and uninterrupted connection.
5. Installation
The mouse can only be used wireless. The included USB cable is only used to charge the mouse. Pro-
ceed as follows:
Remove the USB-A dongle from the bottom of the mouse and connect it to a free USB-A port on your
PC. The mouse is now ready for use.
Label is located at the bottom.
Switching on and off
Switch the mouse on using the ON/OFF switch at the bottom. The white light strip on the back of the
mouse lights up as the operating LED.
Resolution
The resolution is set directly on the mouse. Scroll through the settings by pressing the DPI switching
button several times. The preset resolutions are 1000, 1200 and 1600 DPI. The red LED flashes to
confirm when the DPI switching button is pressed once, twice or three times to cycle through the
resolutions.
The setting is retained when the mouse is switched off.
Note: 1200 DPI is the default setting.
Battery
The mouse is equipped with an integrated rechargeable battery that enables wireless use. To charge
the mouse, connect it to a USB-A charger or a compatible PC using the included USB cable.
Note: If the mouse has not been used for a long time, the battery may be exhausted. Always fully
charge the battery before use to ensure that the mouse functions optimally.
The charging LED lights up blue during the charging cycle.
6. Connection
Fig. 1 Connect the USB dongle to a free USB port on your PC.
7. Cleaning and care
• Clean the product with a slightly damp soft cloth and a mild detergent. Then wipe it with a dry cloth.
Do not use alcohol, acetone, benzene, abrasive cleaners, etc. to clean the product. Do not use hard
brushes or metal objects.
• Never immerse the product in water or other liquids during cleaning or use. Never hold the product
under running water.
5
EN
Werbung
