VEVOR RM-65 Bedienungsanleitung Seite 8

7.Operating instructions
1.Power on
Press and hold the " " 3s，the green light turns on, the buzzer beeps
once, and the screen lights up to complete the power-on. For the first
power-on,language, date and clock settings will pop up, and then a
boot animation of about 3s.
2.Power off
①Press and hold the " " 3s，and the shutdown confirmation interface
will pop up. Move the cursor to switch to "Yes", and short press " " to
complete the shutdown.
②Press and hold the " " 10s to force shutdown.
3.Exit "Measure"
After power-on, the device directly enters the "Measure" interface.
Click the " " to exit the "Measure" interface and enter the main menu
interface.
4.Enter "Measure"
Under the main interface, move the cursor to the "Measure" and click
" " to enter the measurement interface.
5.Data switching in the "Measure" interface
Short press the " " or the " " to switch between "Accumulated AVG",
"24h Value", "48h Value", "72h Value", "96h Value", and "Accumulated
Peak" to view different types of detection data.
The default state is "Accumulated AVG", and if there is no operation for
50s, it will automatically switch to "Accumulated AVG".
6."Data"
Select the "Data" in the main menu, short press the " " , and then
select the data to be viewed.
- 6 -