Connected Devices; General Information; Operating Environment - Renkforce Rf-M2E-200 Bedienungsanleitung

Operating Instructions
Portable M.2 2230 NVMe/SATA SSD Enclosure
with Magnetic for iPhone 16/15 Pro Max ProRes,
Space Grey
Item No. 3347286
1 Operating Instructions for download
Use the link www.conrad.com/downloads
complete operating instructions (or new/current versions if available). Follow the instructions
on the web page.
2 Intended use
This product is intended to be used as a portable SSD enclosure that enables data transmis-
sion and features a built-in magnetic structure to prevent it from falling off the phone with a
magnetic back.
The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must
be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements. For safety and
approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
USB4 , USB Type-C and USB-C are registered trademarks of USB Implementers Forum.
® ® ®
3 Delivery content
SSD enclosure
USB-C to USB-C cable
® ®
Fastener
Lanyard
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
For indoor use.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting per-
sonal injury or damage to property. Such cases will invalidate the warranty/
guarantee.

5.1 General information

The device is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
If you have questions which remain unanswered by these operating instructions, contact
our technical support service or other technical personnel.
Maintenance, modifications and repairs must only be completed by a technician or an au-
thorised repair centre.
5.2 Handling
Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.

5.3 Operating environment

Do not place the product under any mechanical stress.
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
Protect the product from high humidity and moisture.
Protect the product from direct sunlight.
Do not switch the product on after it has been taken from a cold to a warm environment.
The condensation that forms might destroy the product. Allow the product to reach room
temperature before you use it.
(alternatively scan the QR code) to download the
Thermal pad
Silicon pad
Operating instructions
5.4 Operation
Consult an expert when in doubt about the operation, safety or connection of the appliance.
If it is no longer possible to operate the product safely, take it out of operation and protect
it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation
can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.

5.5 Connected devices

Also observe the safety and operating instructions of any other devices which are con-
nected to the product.
6 Product overview
1
2
3
1 Hanging loop
2 Lid
3 LED indicator
Light up: power on
Flash: read and write data
7 Installation
1. Remove the lid from the opening position.
2. Insert the fastener into the semi-circular notch of your hard drive.
Finger
position
3. Insert the hard drive into the SSD slot at about a 45-degree angle, and push the fastener
into the fastener hole and turn it to secure the hard drive.
45°
4. Peel off the protective film from the thermal pad, and attach it to the hard drive. Then, place
the silicon pad on the thermal pad.
5. Close the lid back on the enclosure.
4 SSD slot
5 Fastener hole
6 USB-C port
®
Silicon pad
Thermal pad
M.2 Hard drive
4
5
6