Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mode 2 - the light flashes twice.
10% power until sunrise
+ 100% on movement for 30 sec.
Mode 3 - the light flashes 3 times.
0% power until sunrise
+ 100% on movement for 30 sec.
Mode 4 - the light flashes 4 times.
100% power until sunrise
Note: Please wait for the flashing mode confirmation (1 to 4) before switching to
another mode.
3.
The brightness can be set individually in each of the 4 preset modes. In mode 1,
for example, you can increase the preset output from 20% to 30, 40, 50% etc.
To set the brightness, press the switch (4) twice in quick succession in any mode.
The light flashes twice quickly to switch to brightness mode.
After selecting this mode, each click on the switch (4) will increase the current out-
put until 100% is reached. If you click again, the output starts at 0% again.
If no button is pressed within 5 seconds, the light flashes 3 times quickly, automati-
cally exits the brightness setting and saves the last setting entered.
4.
Press and hold for approx. 6 seconds to reset the light to its factory settings.
Note: If the individual modes can no longer be traced due to individual changes
to the settings, we recommend resetting to the factory settings and then starting
again at mode 1.
Werbung
