Making The Auto Link Folder Settings - Sony CPF-IX001 Installationsanleitung

Making the AUTO LINK FOLDER Settings

All supportable contents files that exist on the path indicated in the
dialog box are automatically loaded to M-crew Server.
1
Click [Start] – [All Programs] – [M-crew Server] –
[TOOLS] – [AUTO LINK] in that order.
"AUTO LINK FOLDER SETUP" dialog box appears.
2
Click to place a check in the checkbox for the path that
contains the files to be loaded. Click again to remove the
check from checkboxes for paths that are not to be loaded.
Tip
Sub-folders of the selected folder are also subject to the AUTO LINK
function.
Example: When the two paths [C:\AAA\BBB\CCC] and
[C:\AAA\BBB\CCC\DDD] can be selected.
When [C:\AAA\BBB\CCC] is selected, the DDD folder which is located
below the CCC folder is also automatically subject to the AUTO LINK
function. Therefore, the [C:\AAA\BBB\CCC\DDD] checkbox is disabled.
3
Click [OK] (or [Next]).
The contents located on the path set to on by the checkbox are
loaded automatically. When not making this setting, click the
[Cancel] (or [Skip]) button.
13
GB