Installing The Speaker - Cabletech Uch0122 Bedienungsanleitung

Installing the speaker
a
Installing Speaker Bracket
• Place the speaker bracket on the back Of speaker, align to holes, as shown in fig.4.l
• Attach the speaker bracket to the back of the speaker using appropriate combination of screws. as shown in fig.4.2.
Note: To select the number of screws according
Installing The Speaker
• Place the speaker bracket mounted
• Tighten the safety screws through
Important: Make sure the brackets mounted speaker is correctly mounted and the safety locking screws are
locked safely before loosening
_CRBLETECH
User manual
to the mounting
fig. 4.1
speaker onto the speaker
the mounting holes, do not over tighten!
the speaker.
8
holes of speaker.
plate, as shown in fig 5.1.
as shown in fig 5.1.
fig. 3.2
fig. 4.2