Intex C1500 Bedienungsanleitung Seite 9

FILTER PUMP STATIONARY MOUNTING OPTION
Some countries, especially in the European community, require the filter pump
to be secured to the ground or to a base in a permanent upright position. Check
your local authorities to determine if there is a regulation in your area regarding
above-the-ground swimming pool filter pumps. If yes, then the filter pump can be
mounted to a platform using the hole located in the base. See drawing below.
The filter pump can be mounted on a cement base or onto a wooden platform to
prevent accidental falling over. Total assembly must exceed 18kg.
1 x M4 HEXAGON HEAD BOLT/SCREW
The power cord plug to the 220-240 volt electrical power source of the filter pump must be
positioned more than 3.5 m away from the pool walls. Check your local authorities to determine
the appropriate standard and requirements for "electrical installation of swimming pools and basins
equipment". The following table is for reference only:
Country/Region
International
France
Germany
The Netherlands
SAVE THESE INSTRUCTIONS
(108) MODEL FP636 FILTER PUMP ENGLISH 7.5" X 10.3" PANTONE 295U 05/29/2024
Standard Number
IEC 60364-7-702
NF C 15-100-7-702
DIN VDE 0100-702
NEN 1010-702
108
English
A
Page 9