Repair And Maintenance - Homcom Aa1-106V70 Bedienungsanleitung

WARNING: Always ride in an open outdoor area, which is clear of obstacles.
Never press the accelerator without being properly balanced on the scooter,
ensuring both hands are firmly gripping the handlebar.

Repair and Maintenance

WARNING: Before any maintenance, ensure the power is off.
Adjusting the brakes: Tools required: 10mm wrench
FIG.7
1.To adjust the brake cable wire, turn
the adjuster drum on the lever
clockwise (to loosen) or anti-
clockwise (to tighten). Adjust the
drum in small increments to the
desired setting. If the brake still
requires adjustment, proceed to
the next step.
WARNING: Practice using the brake in an open area without obstacles, so you are
familiar with its operation and can make smooth and controlled stops.
Loose
Squeeze in
10
2.If the brake cable is still too tight,
use a 10mm wrench to tighten the
brake cable for additional
adjustment on the cable. Make
sure the 10mm nut is tightened
after adjusting.
FIG.8