Herunterladen Inhalt Inhalt Diese Seite drucken

Accessories; Refrigerator Compartment; Freezer Compartment - Ariston MBA 45D1 NFI Gebrauchsanleitungen

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 43

Accessories

Refrigerator compartment

removable and their height may
1
be adjusted thanks to special
rails ( see diagram ), allowing
2
easy storage of large
containers and bulky food. The
height may be adjusted without
removing the shelf completely.
to storing food in vacuum-
packed containers. Food keeps
for longer when stored in the
containers provided.
horizontally ( see diagram ).
Yoghurt, butter or general
containers may also be stored
here.
models are fitted with a new
active carbon odour filter,
which ensures better air quality
inside the refrigerator.
The filter is located on the
bottom right-hand side, inside
the ventilation opening. To
activate it, remove the sticker
from the opening ( see diagram ).
*
Indicator light: identifies the coldest
area in the refrigerator.
1. Check that OK appears clearly on the indicator light
( see diagram ).
v e r t
n o i r consulter la notice
2. If the word "OK" does not appear it means that the
temperature is too high: adjust the REFRIGERATOR
OPERATION knob to a higher position (colder) and
wait approximately 10 hours until the temperature
has been stabilised.
• Number and/or position may vary.
*
Available only in certain models.
: the shelves are
shelf dedicated
shelf: stores cans
*
: some
3. Check the indicator light again: if necessary,
readjust it following the above process. The indicator
may also be completely black when large quantities of
food are placed inside or when the door is opened
repeatedly. If this is the case, set the temperature
again (see Using the display).
! Any further adjustments to the temperature should be
carried out at 10 hour intervals, as this is the amount of
time needed for the temperature inside the refrigerator
to stabilise.

Freezer compartment

: for making ice.
1. Take out the tray by pushing
it up and then outwards ( see
diagram ).
Check that the tray is
completely empty and fill it with
water using the opening
provided.
2. Take care not to exceed the
level indicated (MAX WATER
LEVEL). Excess water prevents
the ice cubes from being
dispensed (if this happens,
wait for the ice to melt and
empty the tray).
3. Turn the tray 90°: the water
fills up the moulds ( see
diagram ). Close the opening
with the lid and replace. When
MAX
WATER LEVEL
the ice has formed (minimum
time approximately 8 hours),
knock the tray against a hard
surface.
sparkling wine or champagne
reach the right temperature.
Place the bottle in the bucket
provided inside the FREEZER
and STORAGE compartment.
The bucket may be used to
serve the bottle and keeps it
cool outside the appliance.
GB
: ensures bottles of
19

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Mba 45d2 nfi

Inhaltsverzeichnis