byox RUMBLE Gebrauchsanleitung Seite 10

EN
INSTRUCTION MANUAL FOR USE OF SCOOTER RUMBLE
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. TO ENSURE SAFE USE OF THE PRODUCT,
ALL INSTRUCTIONS AND RECOMMENDATIONS GIVEN IN THE MANUAL SHOULD BE STRICTLY FOLLOWED.
INTENDED USE – FIGURE A
The children's scooter 2in1 is designed for use by children over 36 months of age and maximum weight of the child up
to 50 kg. The maximum permitted weight for the saddle is up to 30 kg. The maximum permitted weight for the deck of
the scooter is up to 50 kg. The scooter can be ridden in a standing position (for children above 3 years and weighing up
to 50 kg) or used with a saddle (for children between above 36 months and weighing up to 30 kg) - see Figure A. The
product is designed for play and home use. It is intended for use by one child only. The child who will use the scooter
must be able to stand steady on their feet and move on their own.
SAFETY INSTRUCTIONS AND WARNINGS
•
WARNING! Do not use this product without reading the instructions for use first.
•
WARNING! To be used in the presence, under the control and direct monitoring of an adult.
•
WARNING! Protective equipment should be worn. Make sure your child always wears full protective protective
equipment that includes at least: helmet, knee pads, elbow protectors and wrist protectors. Make sure your child
wears sturdy, non-slip shoes, covering his toes, because of danger of feet injury while using the scooter.
•
WARNING! Not to be used in traffic.
•
WARNING! The scooter has been designed to be ridden by young children on flat and smooth surfaces. Do not use
the product on soft surfaces such as grass, soil, or sand. To be used only in well-lit and safe playgrounds and secure
areas. Do not use on wet or slippery surfaces. Never allow child to ride near pools and stairs. Do not use in rainy
weather or in the evening.
•
WARNING! The product needs to be used with caution, since skill is required to avoid falls or collisions causing injury
to the user or third parties. Before the first use teach your child how correctly to ride the scooter. Make sure the child
understands how the scooter works and can use it correctly and safely in a safe and supervised environment.
•
WARNING! Use the scooter only for its intended purpose. If a child uses the scooter in a manner other than its
intended use, there is a risk of damage that could lead to serious injury. Do not use to carry loads. Not to be used for
acrobatic or other risky manoeuvres such as making tricks, riding on ramps etc.. Not to be used by more than one
child at a time.
•
WARNING! The packaging of this scooter contains small parts that can cause choking or suffocation if swallowed. To
be unpacked and assembled away from children.
•
If the scooter is bumped, carefully inspect the scooter (such as sharp edges or cracks) and its components for possible
malfunctions before the child uses it again. Do not use the toy if any parts are found to be missing or damaged.
Contact MONI TRADE for replacement parts and instructional literature, if needed. DO NOT substitute parts.
•
IMPORTANT: Do not make any modifications to the product! Do not change any part of the design of the scooter,
because it might result in reducing of the safety of the product! Do not place or tie any objects or other accessories
and strings to it. This may cause hooking, entanglement, and loss of balance, resulting in injury to the child. Do not
remove the braking system.
ASSEMBLY OF THE SCOOTER AND SADDLE – FIGURE B
FOLDABLE SCOOTER: WARNING! The toy comes assembled. The scooter has a folding mechanism and is supplied with a
removable saddle assembled on the handlebar stem. This scooter is foldable. Before being used by a child, the scooter
must be assembled by an adult who has previously read the assembly instructions. Keep fingers and hands from the
folding mechanisms to avoid pinching when assembling the scooter. Do not let children play with the folding mechanism
to avoid the injury risk. Keep fingers off all moving parts to avoid pinch and injury.
•
UNFOLDING THE SCOOTER - FIGURE 1: To unfold the scooter, press the fold/unfold button and pull the
mechanism up. Pull the steering column up until it is fully upright. After scooter is unfolded, release the plastic
locking finger and you will lock the system. The scooter is ready for use. It can be ridden in an upright position.
Folding the scooter: Pull up the folding mechanism and press down the steering column in the direction of the
stepping platform.
•
HANDLEBAR HEIGHT ADJUSTMENT - FIGURES 2: To adjust the height of the handlebar, first release the plastic
tightening bracket (3) by turning it in a counterclockwise direction. Then, press the spring button, which can be
seen through the holes in the front. This way you release the handlebar, which can move up or down, according
10