Intex CLEARVIEW PRISM FRAME Benutzerhandbuch Seite 9

(115IO) CLEARVIEW PRISM FRAME™ RECTANGULAR POOL ENGLISH 7.5" X 10.3" PANTONE 295U 06/25/2024
POOL SETUP ( continued )
10. Assemble the ladder. The ladder has separate assembly instructions in the ladder box.
11. Place the assembled ladder over one of the sides with one of the liner installation team members
entering the pool to smooth out all bottom liner wrinkles. While inside the pool this team member
should check the 2 drain valves (in corners) to be sure the inside drain plug is inserted into the valve.
This team member should push inside corner in an outward direction.
NOTE: Remove the clear view panel protective films from the inside and outside of the pool before
filling with water. If not removed promptly, the protective films may adhere to clear view panel and
affect the level of clarity.
12. Before filling the pool with water, ensure that the drain plug inside the pool is closed and that the drain
cap on the outside is screwed on tightly. Fill the pool with no more than 1 inch (2.5 cm) of water. Check
to see whether the water is level.
IMPORTANT: If the water in the pool flows to one side, the pool is not completely level. Setting
up the pool on unleveled ground will cause the pool to tilt resulting in the sidewall material to
bulge. If the pool is not completely level, you must drain the pool, level the area and re-fill the
pool.
Smooth out the remaining wrinkles (from inside pool) by pushing out where the pool floor and pool
sides meet. Or (from outside pool) reach under the side of the pool, grasp the pool floor and pull it out.
If the ground cloth is causing the wrinkles, have 2 people pull from either side to remove all wrinkles.
13. Fill the pool with water up to just below the sleeve line
(see drawing 9).
NOTE: To ensure the clarity and durability of the clear view
panel, keep the pool water level above the clear view panel
all the time, add water if necessary.
Important information regarding the clear view panel:
To ensure the best experience and lasting clarity of your clear view panel, it is important to follow these
general practices:
• Handle the clear view panel with extra care during unfolding of the liner and during installation to avoid
scratches, folds or kinks that can affect the clarity.
• Always maintain the water level above the clear view panel to avoid water line marks.
• Maintain clean and well balanced pool water quality – see "Pool Maintenance and Chemicals" section for
tips.
• Use only a clean, soft and damp towel to occasionally clean the clear view panel - never use harsh or
abrasive device or chemicals.
• When taking the pool liner down, follow the instructions on folding the liner and rolling the clear view panel.
NOTE: Over time, continuous exposure to sunlight may affect the level of clarity of your clear view panel.
This is normal.
Before allowing anyone to use the pool, hold a family meeting. Establish a set of rules that
include, at a minimum, the important safety rules and general aquatic safety information in this
manual. Review these rules on a regular basis and with all users of the pool, including guests.
SAVE THESE INSTRUCTIONS
IMPORTANT
115
English
A
9
WATER LEVEL
Page 9