cecotec BAMBA PRECISIONCARE TITANIUM PERFECTCUT Bedienungsanleitung Seite 79

- Turn off and disconnect the device from the mains supply
before cleaning, assembling or disassembling any of its parts.
- Clean the device after each use with the cleaning brush or a
lightly dampened cloth. Do not use water.
- Do not use compressed air, abrasive cleaners, or scouring
pads to clean the device.
- Do not immerse the appliance in water or any other liquid or
place it under running water.
- Press the foil frame release button and remove the foil frame
by turning it counterclockwise. Clean the foil and the foil
frame.
- In order to remove the blades' support from the blades, turn
the floating system release knob counterclockwise.
- Remove the inner cutter and clean it. Use the short side of the
brush to clean the inner cutter.
- Use the long side of the brush to clean the guard, foil frame,
hair chamber and shaver body.
- Use the brush to remove hair clippings from the device's body.
- Reassemble the device's parts.
Note
It is suggested to replace the shaving cap and shaving head at least
every year in order to maintain the shaver's cutting performance.
BAMBA PRECISIONCARE TITANIUM PERFECTCUT
ENGLISH
79