Tv And Video Recorder; Playback Ntsc; Copy Facility; Search For And Store The Test Signal Of The Video Recorder - Tech Line TL-32LC715 Bedienungsanleitung

that you will need to subscribe to the broad-
casting organisation whose programmes
you wish to receive. This organisation will
supply you a corresponding decoder unit to
allow the programmes to be unscrambled.
For further information ask your dealer. See
also the booklet supplied with your decoder.
Connect a decoder with an aerial socket
to the TV
• Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
• Connect the decoder to the TV with a Scart
cable to SCART 1.

TV And Video Recorder

• Connect the aerial cables.
Better picture quality can be obtained if you
also connect a Scart cable to SCART sock-
ets.

Playback NTSC

To use this option you can;
• Connect an NTSC VCR player to a Scart
socket at the rear side of the TV.
• Connect an NTSC VCR player to RCA Jacks
at the side of the TV.
AV
Then, press button
source.

Copy Facility

Source selection for VCR recording.
• Select Feature menu.
• Select Ext-2 Out by pressing
• Select a source to copy the picture from that
source.
Search For And Store The Test
Signal Of The Video Recorder
• Unplug the aerial cable from the aerial
socket of your video recorder.
• Switch on your TV and put the video recorder
on the test signal. (See the booklet for your
video recorder.)
to select appropriate
 
/ button.
• Enter the Install menu and select search.
• Search for the test signal of your video re-
corder in the same way as you searched for
and stored the TV signals. Store the test sig-
nal under programme number 0.
• Replace the aerial cable in the aerial socket
of your video recorder once you have stored
the test signal.

Camera And Camcorder

To Connect To AV Input
Connect your camera or camcorder to AV
(EXT-4) input at the
• Connect your equipment to the TV via VIDEO
(yellow), AUDIO R (red) and AUDIO L (white)
inputs. You must connect the jacks to the in-
put using the same colour.
To Connect To S-VHS Input
Connect your camera or camcorder S-VHS
input (EXT-4S)
• Connect your equipment to the TV via S-VHS
input and audio inputs of AV inputs by using
S-VHS cables.
Connect The Decoder To The
Video Recorder
Some video recorders have a special Scart
socket for decoder.
• Connect a Scart cable to the Scart socket of
your decoder and to the special Scart socket
of your video recorder. Refer to the booklet
of your video recorder.
• To connect your video recorder to the TV, re-
fer to the TV and Video Recorder section.
If you want to connect more equipment to
your TV, consult your dealer.

Connecting Headphones

Use the stereo headphone socket at the
right side of the TV, to connect headphones.

Connecting External Equipment

To connect the external speakers to your TV,
use the Audio Line Outs located at the right
rear side of the TV.
- 43 -
right side of the TV.
at the right side of the TV.