Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Fastext
Your TV supports the 1000 page Teletext
system. When the page number of any of
the 1000 pages in memory is entered, the
system will not search for the requested
page; instead it will display the page auto-
matically. If the requested page is not in
memory, the system will search for the re-
quested page number and save the 1000
pages including the requested page into
memory after finding it.
• Press the
button to move the Teletext
screen forward one page at a time.
• Press the
button to move the Teletext
screen backward one page at a time.
For Fastext
The subject-heading for the information may
have a particular colour.
• Press an appropriate RED, GREEN, YELLOW
or BLUE button in order to reach the relevant
page quickly.
For TOP text
TOP text mode of operation will be activated
automatically according to the transmission.
• If TOP text transmission is present, colour
coded buttons will appear in status row.
• If TOP text transmission is not present, sta-
tus row will not appear.
The subject-heading for information may be
located in coloured box.
In Top mode the
quest the next or previous page respectively.
If TOP text transmission is not available, in
case of operation of these commands,
wraparound occurs. For example page 100
appears to be one greater than page 199.
or
commands will re-
Connect Peripheral
Equipment
There is a wide range of audio and video
equipment that can be connected to your TV.
The following connection diagrams show
you where the different (Optional) equipment
should be connected at the rear side of the
TV.
High Definition
Your LCD Television
ing High Definition pictures from devices
such as a High Definition Satellite Receiver
or DVD Player. These devices must be
connected via the HDMI socket (EXT-5) or
Component Socket (EXT-3). These sockets
can accept either 720p or 1080i signals.
Note: For proper connection of a device to
HDMI input of your TV via using a DVI-to-
HDMI cable, use PC Audio In input for sound
connection.
Via The Scart
LCD TV has
2
connect peripherals (e.g. video, decoder,
etc.) which have Scart sockets to the TV, use
SCART 1 or SCART 2.
If an external device is connected via the
Scart sockets, the TV will be switched to AV
mode automatically.
• Do not connect Digital Set Top Box devices
via Scart 1.
Use Scart 2.
Via Aerial Input
If you want to connect to your TV, peripherals
like video recorders or decoders, but the de-
vice you want to connect does not have a
Scart socket, you should connect it to the
Aerial input of the TV.
If the VCR is connected via Aerial input it
is suggested to use Programme 0.
Decoder
Cable TV offers you a wide choice of
programmes. Most of them are free, others
are to be paid for by the viewer. This means
- 42 -
is capable of display-
Scart sockets. If you want to
Werbung
Kapitel
Inhaltsverzeichnis
