Apollo Tikki Gebrauchsinformationen Seite 16

Mount the center fin
Without a mounted center fin the board will not ride directionally stable and can tip more easily.
Mount the center fin before each use of the board.
1. place the board with the bottom up on a smooth, flat and dry surface.
2. push the center fin into the fin holder from the front so that the tip points in the same direction as the outer fins.
3. insert the safety pin through the corresponding notches in the fin holder and the center fin.
- To remove the center fin, proceed in reverse order
USE
- If you want to transport additional items with the board, use the fastening cord.
- If you transport the board over land, use the carrying handle if possible.
CLEANING
Improper or irregular cleaning of the SUP can lead to damage
- Do not use any aggressive cleaning agents, brushes with metal or nylon bristles or any sharp or metallic
cleaning objects such as knives, hard spatulas and the like. They can damage the surfaces.
- Do not use solvents to clean the Board Set.
- Clean the board thoroughly after each use. You can clean the board when it is inflated or when the air is deflated.
1. Make sure that the valve cap is closed.
2 Place the board on a smooth, flat and dry surface.
3. spray the board with a water hose or clean it with a soft, moistened sponge.
4. wipe the board with a dry, soft cloth.
5. allow the board to dry completely.