Bestway FLOWCLEAR Benutzerhandbuch Seite 5

Any change ofvalve position,pump size, grille size can cause a changeofthe
flow andthe suctionvelocity can be increased.
Mind all the safety requirementsand recommendationsdescribedin the
manual.
NOTE:
Please examine equipment before use. Notify Bestway at the customer service
address listed on this manual for any manufacturing defect or missing parts at
the time ofpurchase. Vefifythat the equipment components represent the filter
pump model that you had intended to purchase.
NOTE:
Place pump on a solid and level ground. Pay attention to position ofpool and
pump so adequate ventilation, drainage, and access for cleaning is available
Never place pump in an area that may accumulate water, or in an area where
foottraffic will flow aroundthe pool.
It is necessaryto have the plug accessible aner installation ofthe pool.
NOTE:
Atmospheric conditions may affect the perfomance and life span ofyour filter
pump.Unnecessarywear andtear may occur duringperiodsofcold, heat and
exposureto sun. Menever possibleshelter pump fromthese conditions.
It is importantto ensurethe factory equippedstopperplugs for the inlet and
outlet pods replacethe screensbeforeremovalor maintenanceon the pump is
attempted.
NOTE:
Do not add chemicals in the filter pump.
Dont plug or unplug the appliance if hand is wet.
Always unplug the appliance .
• On raining days
• Before cleaning or other maintenance
• Leave it unattended on holidays
Safekeeping the instruction. For reconstruction the pool set everytime, please
always refer to the instructions
-If instructionis missed,pleasecontactwith Bestwayor searchit in website:
www.bestwayservice.com
NOTE:This productis not intendedfor commercialuse.
Please read the instruction manual carefully and keep it for future
reference.
SAVE THESE INSTRUCTIONS.
s.s-ouxs