Werbung
Verfügbare Sprachen
Verfügbare Sprachen
D. Laser Mode
Enter the GRBL Setting interface and modify the $32 parameter to 1, and then the $30
parameter will automatically adjust to 1000. The machine will then switch to laser mode.
After the lattice probing is completed, the
height map can be applied. At this point, an
engraving plane will be generated. If the
plane is tilted, the tool will adjust the Z-axis
value in real-time based on the tilted plane
as it moves in the X and Y directions,
ensuring that the tool always maintains a
relative height from the plane.
If the height map plane probing fails, the
interface shown in the left image will be
displayed. Please follow the prompts to
restart the height map tool setting or exit.
13
Werbung
