Herunterladen Diese Seite drucken

Steinberg Systems SBS-LAB-101 Bedienungsanleitung Seite 13

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
Inadequate fluids have deposits that are difficult to dissolve, leading to irreversible damage to the piston,
valves, and drain tube.
The product is not intended for use with the following liquids/suspensions / substances:
Low flash point liquids.
FEP, ETFE, PFA, PTFE, PVDF, PP.
Aggressive liquids for FEP, ETFE, PFA, PTFE, PVDF, PP, borosilicate glass, or Al2O3 ceramics.
Solutions containing hydrofluoric acid.
Suspended solids, as particulates can clog or damage the device (e.g., activated carbon).
Liquids forming insoluble precipitates and decomposing solutions (e.g., biuret reaction).
Explosive liquids (e.g., carbon disulfide).
Trifluoroacetic acid.
Tetrahydrofuran.
Dispense flammable liquids only in glass tubes and do not wipe the dispenser when it is dry to avoid static
electricity.
Fluids that form soluble deposits can impede piston movement.
Use nitric acid (concentration max 60%) with PVDF thread adapters.
The operator is responsible for any damage caused by misuse.
3.1.
Description of the SBS-LAB-101 device
3.2.
Installation of the SBS-LAB-101 device
Adjust the length of the aspiration tube to the height of the bottle and fix it.
Screw in the dispenser. Hold the bottom of the bottle. Place the dispenser and bottle in an upright position.
1 - Piston
2 - Capacity scale
3 - Dosage adjustment
indicator with lock knob
4 - Liquid outlet tube

Werbung

loading