Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Safety of use
CAUTION!
Read all safety warnings and instructions. Failure to follow warnings and instructions
could result in serious injury or even death.
The term "device" or "product" in the warnings and in the description of the instructions refers to
Bottle tip dispenser
2.1.
Safe use of the product
a)
If in doubt as to whether the product is working properly or found to be damaged, contact the
manufacturer's technical service.
b)
No children or unauthorized persons are allowed in the work area.
c)
Use the product in a well-ventilated area.
d)
Keep this manual for future reference. If the product is to be handed over to a third party, hand it over
with this user manual.
e)
Keep packaging components and small installation parts out of the reach of children.
f)
Keep the device away from children and animals.
g)
When using this product together with other devices, also follow the other instructions for use.
h)
The device is not intended to be used by persons (including children) with reduced mental, sensory or
intellectual functions or persons who lack experience and/or knowledge unless they are supervised or
have been instructed by a person responsible for their safety on how to operate the device.
i)
Use caution and common sense when operating this device.
j)
Use personal protective equipment as required when operating the unit as specified in Section 1 of the
explanation of symbols. The use of appropriate, approved personal protective equipment reduces the
risk of injury.
k)
The product is not a toy. Children should be watched to ensure that they do not play with the appliance.
l)
Keep the product out of the reach of children.
m) Do not leave the device switched on unattended.
n)
Clean the product regularly.
o)
Do not tamper with the device to alter its performance or design.
p)
Keep the unit away from sources of fire and heat.
q)
In the case of the SBS-LAB-101, the brown color of the reagent bottle protects it from being heated by
light or sunlight. The bottles of other models are resistant to acids and high temperatures.
r)
The reagent may be harmful to the eyes and skin. Use eye and hand protection when unscrewing the
dispenser from the bottle.
s)
Ensure the dispenser is tightly mounted on the bottle to prevent reagent spillage. It can cause damage
to the surface it comes into contact with.
t)
Some substances can destroy the product. Work only with the substances listed in the instructions.
u)
Comply with biosafety regulations and check the product's resistance to the substances in question
when working with chemical, corrosive, infectious, pathogenic, and biological substances.
v)
Do not overfill the bottle (exceed the designated maximum level).
CAUTION! Although the product has been designed to be safe, with adequate safeguards, and despite
the additional safety features provided to the user, there is still a slight risk of accident or injury when
handling the unit. Caution and common sense are advised when using the product.
3. Instructions for use
The product is used to dispense aqueous solutions directly from the bottle.
Limits of use:
Density
Steam pressure
Kinematic viscosity
Temperature
Up to 2.2 g/cm
3
Up to 500 mbar
Up to 500 mm
/s
2
15 - 40 °C
Werbung
