Camera Reset; Lens Adjustment - Instar In-8015 Bedienungsanleitung

8. Camera
In order to reset your camera, please press the
small reset button at the back of your camera
for 15-20 seconds.
mation sound after you
After the reset, the camera
can take up to 60 seconds,
camera will be set back to factory
Therefore, please use a network
to reconnect the camera to your network.
more information on how to install your cam-
era again, please visit: http://install.instar.com
Once you connect the camera to the network,
use the INSTAR
camera's IP address
WebUl to start configurating
again.

9. Lens Adjustment

The IN-8015 Full HD standard lens has a depth of field (also focus range) that is
adjusted to a distance
focus, you will have to adjust the lens accordingly.
Lens Tool
Fig.l & 2:
Open the WebUI and check the live video. Turn the lens, using the lens focal tool
(part of the delivery content) until your area of interest is in focus. If you turn the
lens clock-wise, the plane of focus moves away from the camera's
and if you turn it counter-clock-wise,
Go to http://install.instar.com
Reset
You will hear
release the
will restart, which
and all data in the
cable or WPS
Camera Tool to find
and open the camera's
your camera
of approx. 5 - 10m. In case your area of interest is out of
Fig.
the confir-
button.
defaults.
For
out the
O
the plane of focus moves towards it.
o
ALARM
0000
ANT
STATUS OUT IN csv
press 15-20s
to reset camera
Fig. 2
image sensor,
10-EN