Remote Access - Instar In-8015 Bedienungsanleitung

7. Remote
The camera supports
the world using internet connection.
7.1. P2P Protocol
The P2P protocol provides you with a simple and fast way to connect and com-
municate with your camera,
platforms and devices. It works with any type of internet connections (local and
public IPv4/6, mobile data like LTE, 3G, etc.) as no port forwarding is necessary.
a) Install our newest InstarVision App using the app store on your device
b) Open the app, click the "+" symbol
c) Open your camera's WebUI, navigate to the menu Network -> Remote
access and scan the QR code to add your camera.
7.2. DDNS Service - HTTP(S) Protocol
The DDNS service provides you with the possibility to directly access your
camera remotely via your internet router. Therefore you can use any modern
web browser, our InstarVision software/app and/or third party software for
communication via the http(s) protocol.
a) Open the WebUI and go to Network -> IP configuration.
camera with a unique HTTP (e.g. 8081 , 8082,...), HTTPS (e.g. 443, 444,...)
and RTMP Port (e.g. 1935, 1936,...)
b) Access your router and set up port forwarding rules for each port
c) Open the app, click the "+" symbol and choose New IP camera
d) Open your camera's WebUI, navigate to the menu Network -> Remote
access and scan the QR Code to add your camera. Please be aware
that the DDNS Service might not work from your local network
test with your LTE / data connection.
Please consider that port forwarding
address. For detailed description to port forwarding on your router model and
DDNS Service in general, please refer to:
9-EN
Access
two ways to remotely
using our InstarVision
only works if your router has a public IPv4
http://remote.instar.com
access the live video from all over
app, available
and choose New P2P Camera
Go to http://install.instar.com
for all major
Provide each
- always