4.5 Common Interface
− Installing the CI Card
u Purchase the CI CAM module by visiting your nearest dealer or
by phone. u Insert the CI CARD into the CAM in the direction of
the arrow until it fits. u Insert the CAM with the CI CARD installed
into the common interface slot.
➢
Insert the CAM in the direction of the arrow, right up to the
end so that it is parallel with the slot.
u Check if you can see a picture on a scrambled signal
channel.
➢
You can install the CAM anytime whether the TV is ON or
OFF.
− Application Info.
This contains information on CAM inserted in the CI slot and
displays it.
u Press the ENTER button to display the information for your
application.
− CI Menu
This helps the user select an item from the CAM-supported menu.
u Press the ENTER button. The options of the selected menu are displayed.
Press the ▲ or ▼ button to select the required option, then press the ENTER button.
➢
Select the CI Menu based on the PC Card menu.
4. System
This menu consists of 5 sub-menus:
Product Information, Signal Information, Software
Upgrade, and Reset.
− Product Information
You can view your product information. For service or
repair, please contact a Samsung approved dealer.
Press the ENTER button with Product Information
selected. The product information menu is displayed.
− Software Version / Firmware Version
− Signal Information
You can get information about the signal status.
Press the ENTER button with Signal Information
selected. The technical information for signal status is
displayed.
− Service / Service ID / Multiplex / Network / Bit
error level / Signal Strength
BN68-01419A.indb 40
DTV
DTV
DTV
DTV
DTV
English - 40
Application Info.
Type: CA
Manufacturer: Canal Plus
Info: Top Up TV
Return
CI Menu
Move
Enter
Exit
Setup
System
Move
Enter
Return
System
Product Information
Signal Information
Software Upgrade
Reset
Move
Enter
Return
Product Information
Software Version: T-PERLDEUC-0104
Firmware Version: T-EMMAZDEUB-010
Return
Signal Information
Service: ?
Service ID: 0000
Multiplex: ? (TSID 0000,ONID 0000)
Network: ? (ID 0000)
Bit error level:
10
Signal Strength:
0
Return
Continued...
2008-04-08 오전 11:21:25