baurer PROSHARP ADVANTEDGE Maschinenhandbuch Seite 4

i. If devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can reduce dust-related hazards.
j. The rated speed of the accessory must be at least equal to the maximum speed marked on the machine.
Accessories running faster than their rated speed can break and fly apart.
k. Never grind on the sides of a grinding wheel. Grinding on the side can cause the wheel to break and fly
apart.
l. Do not use a damaged accessory. Before each use, inspect the accessory such as abrasive wheels for
chips and cracks. After inspecting and installing an accessory, position yourself and bystander away
from the plane of the rotating accessory while running the machine.
4. Service
a. Have your machine serviced by a qualified repair person using only identical replacement parts. This will
ensure that the safety of the machine is maintained.
5. Personal safety
a. Stay alert, watch what you are doing and use common sense when operating a machine. Do not use a
machine while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal injury.
b. Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask,
non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal
injuries.
c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source,
picking up or carrying the tool. Carrying machines with your finger on the switch or energizing machines
that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the machine on. A wrench or a key left attached to a
rotating part of the machine may result in personal injury.
e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the machine
in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving
parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g. Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool
safety principles. A careless action can cause severe injury within a fraction of a second.
THE FRONT DOOR CAN ONLY BE OPENED USING HMI TOUCH SCREEN
WARNING!
KEEP FINGERS, HAIR AND CLOTHING AWAY FROM CLAMPING AREA
AND GRINDING WHEEL AT ALL TIMES.
04