baurer PROSHARP ADVANTEDGE Maschinenhandbuch Seite 3

PROSHARP BAUER ADVANTEDGE Machine is a skate sharpening machine and should only be used for
sharpening ice hockey blades and skates.
WARNING
Read all safety warnings, instructions, illustrations and specifications provided with this machine.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b. Do not operate this machine in explosive atmospheres, such as in the presence of flammable liquids, gases
or dust. Machines create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while operating the machine. Distractions can cause you to lose
control.
2. Electrical safety
a. Machine plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs
with earthed (grounded) Machiness. Unmodified plugs and matching outlets will reduce risk of electric
shock.
b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
c. Do not expose the machine to rain or wet conditions. Water entering a machine will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the machine. Keep cord
away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of
electric shock.
e. When operating the machine outdoors, use an extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f. If operating the machine in a damp location is unavoidable, use a RESIDUAL CURRENT DEVICE (RCD)
protected supply, Use of an RCD reduces the risk of electrical shock.
3. Machine use and care
a. Do not force the machine. Use the correct machine for your application. The correct machine will do the job
better and safer at the rate for which it was designed.
b. Do not use the machine if the switch does not turn it on and off. Any machine that cannot be controlled with
the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source from the machine before making any adjustments, changing
accessories, or storing machines. Such preventive safety measures reduce the risk of starting the machine
accidentally.
d. Store idle machines out of the reach of children and do not allow persons unfamiliar with the machine or
these instructions to operate the machine. Power tools are dangerous in the hands of untrained users.
e. Maintain machines and accessories. Check for misalignment or binding of moving parts, breakage of parts
and any other condition that may affect the machine's operation. If damaged, have the machine repaired
before use. Many accidents are caused by poorly maintained machines.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g. Use the machine, accessories and tool bits etc. in accordance with these instructions, taking into account
the working conditions and the work to be performed. Use of the machine for operations different from
those intended could result in a hazardous situation.
h. Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
INTENDED USE
SAFETY PRECAUTIONS
03