Fenecon Industrial S Montage- Und Bedienungsanleitung Seite 17

2.10. Operating materials/equipment
2.10. Operating materials/equipment
2.10.1. Electrolyte solution of the battery modules
• Electrolyte solution is used in the battery modules (NMC).
• The electrolyte solution in the battery modules is a clear liquid and has a characteristic odor of organic
solvents.
• The electrolyte solution is flammable.
• The electrolyte solution in the battery modules is corrosive.
• Contact with electrolyte solution can cause severe burns to the skin and damage to the eyes.
• Do not inhale the vapors.
• If the electrolyte solution is swallowed, induce vomiting.
• Leave the contaminated area immediately after inhaling the vapors.
• After contact with skin, wash thoroughly with soap and water.
• Nach Kontakt mit den Augen so schnell wie möglich 15 Minuten mit fließendem Wasser spülen; Sofort an einen
Arzt wenden.
 Further information on the electrolyte solution can be found in the manufacturer's safety data
sheet.
2.10.2. Refrigerant of the cooling system
• Contains pressurized gas, may explode when heated.
• Protect from sunlight and store in a well-ventilated place.
• Rapid evaporation of the liquid can cause frostbite.
• Misuse or intentional inhalation can be fatal without alarming symptoms due to effects on the heart.
• May cause cardiac arrhythmia.

The refrigerant used in the integrated air conditioning system is R134a.
16 / 94 FENECON Industrial S assembly and operating instructions
Version:2024.08.1