Timbertech PLMC01 Original Bedienungsanleitung Seite 25

STEP 2
Press the spindle lock button located on the top of the head of the polisher. This
prevents the spindle from rotating, allowing for installation of the base pad. While
pressing down the spindle lock button, screw the base pad tightly into place. Make
sure that the plate is securely fastened.
STEP 3
To install a pad or disc on a Velcro backing plate, center the pad or disc over the plate
and press firmly. To remove pad or disc from Velcro backing plate, grip pad or disc
firmly and pull from plate.
STEP 4
Choose your sponge of choice. Securely attach it to the center of the fastener base
pad. The polishing sponges are fastened with the help of the tape to the rotation
plate.
EN
ASSEMBLY
25