Sd Card Installation - Interphone Sync70 Bedienungsanleitung

3.6 SD Card installation

Remove the TF card cover, insert the card, place back the cover, and secure it
with three screws. Ensure the snap-on cover is oriented correctly. Use a U3-
class memory card (32GB–256GB) from reputable brands for optimal
performance. Other cards may cause malfunctions.
U 3
3.7 TPMS sensors installation
The sensor uses CR1632 batteries. The cover is screwed on, and to replace
the batteries, simply unscrew the cover.
1. Remove valve cap.
2. Clean valve stem.
3. Insert TPMS bolt.
4. Screw the sensor on
valve. Tighten it gently
and ensure no air is
leaking.
5. Lock the sensor with
locking nut.
6. Test for leaks with
soapy water—no bubbles
should appear.
9