Interphone SYNC70 Bedienungsanleitung Seite 14

4.6 TPMS
Tap and wait for the front (F) tire pressure icon to flash. Insert the tire
pressure sensor into the front wheel. Once paired, the F icon will display the
pressure value.
Repeat same procedure for rear wheel, tap
pressure icon to flash. Insert the sensor into the rear wheel. Once both values
are displayed, the pairing is complete.
To remove the tire pressure data, tap on
Abnormal pressure warning
A warning pop-up will appear if the tire
pressure is abnormal.
Pressure warning setup
Tap on settings icon at bottom right of TPMS screen. In the settings menu, tap
the front and rear tire icons to set your desired warning pressure, and unit to
slect between PSI/BAR.
and wait for the rear (R) tire
again after successful pairing.
14