VEVOR SR-R005A Bedienungsanleitung Seite 9

■Have your power tool serviced by a qualified repair person using only
identical replacement parts.This will ensure that the safety of the power
tool is maintained.
■Never service damaged battery pack(not include).Service of battery
pack(not include)should only be performed by the manufacturer or
authorized service provider.
When using heat guns,basic safety precautions should always be followed:
Read All Instructions
■The nozzle of the heat gun becomes very hot during operation and should
not be touched until the tool has cooled.Always hold the tool by the insulated
gripping surface to reduce the risk of serious personal injury.
■ Heat guns produce very high temperatures and must be used with caution to
prevent
combustible material from igniting.Keep tool in constant motion;do not
stop or dwell in one spot.Following this rule will reduce the risk of fire or
serious personal injury ■Excessive heat can generate fumes which may
be dangerous when inhaled.Wear a dust
respirator mask when using the heat gun.Following this rule will reduce the
risk of serious personal injury.
■Keep a fully charged fire extinguisher close at hand for emergency
use.Following this rule will reduce the risk of fire or serious injury.
■Do not leave the heat gun unattended while running or cooling
down.Always set tool on a flat,level surface so nozzle tip is directed
upwards,away from supporting surface,while
running or cooling down.Following this rule will reduce the risk of fire or
serious injury.
■Know your power tool.Read operator's manual carefully.Learn its
aplications and limitations,as well as the specific potential hazards related
to this tool.Following this rule will reduce the risk of electric shock,fire,or
serious injury.
■Always wear eye protection marked to comply with ANSI
Z87.1.Following this rule will reduce the risk of serious personal injury.
■Before using,check all parts for proper function and damage to
component parts.
■Do not use this torch to heat,mold or bend plastic sheets,molding
or tubing.
WARNING
Heat Gun Safety Warnings
respirator mask or dual filter
- 8 -