VEVOR SR-R005A Bedienungsanleitung Seite 5

Operating The Heat Gun
Switching On
1.Install the battery pack(not included).
2.Press and hold the power switch for 3
seconds. 3.Press switch trigger D to turn on
the tool.
4.SR-R005A:Adjust the temperature to your desired level using power switch D.
SR-R005C：Use the"+"or"-"buttons to adjust the temperature to your desired
level.
NOTE:
You can activate the lock-off button C from either the left or right side to
keep the tool running.
SR-R005A
SR-R005C
Installing Operation
- 4 -