IKEA UTDRAG Handbuch Seite 6

ENGLISH
isolation from the mains in case of category
III overvoltage conditions, in accordance
with wiring rules.
Use
The hood has been designed to be installed
and used either as a "Exhausted model", or
as a "Recirculation model".
Exhausted model (see symbol
installation booklet)
Cooking steam is sucked and channelled
outside the house through a discharge duct
(not supplied), fi tted to the hood steam
outlet.
Ensure that the discharge duct is correctly
fi tted to the air outlet, unit using an
appropriate connection system.
Important: If already installed, remove the
charcoal fi lter/s.
Recirculation model (see symbol
installation booklet)
The air is fi ltered through one or more the
charcoal fi lters, and then resent into room.
Important: Ensure appropriate air
circulation around the hood.
Important: If the hood is supplied without
charcoal fi lters, these must be fi tted before
in
the hood can be used. Filters are available
in shops.
The hood should be installed away from
particularly dirty areas, windows, doors and
heat sources.
The accessories for wall fi xing are not
included because walls made of different
materials require different types of fi xing
accessories. Use fi xing systems suitable for
the walls of your home and the weight of
the appliance. For more details, contact a
specialized dealer.
Keep this booklet for future consultation.
6
in