Parkside Performance PPWS 10 A1 Originalbetriebsanleitung Seite 24

GB MT
plate. Adaptation to the
various mains frequen-
cies is automatic.
Connect the device only
•
to a power outlet with a
residual current device
(RCD) of rated residual
current no more than
30 mA.
Connect the appliance to
•
an outlet with a fuse of at
least 16 A.
If the power cord of this
•
device is damaged, it
must be replaced by the
manufacturer, their cus-
tomer service or by a
similarly qualified per-
son in order to avoid haz-
ards. contact the service
centre.
Never use the device
•
if there are children or
animals nearby. People
nearby must wear pro-
tective clothing.
Operation
The device is not a vacu-
•
um cleaner. Do not use
the device like a vacuum
cleaner to vacuum up dry
dirt.
Do not vacuum more li-
quid than you sprayed.
24
Pay attention, be aware
•
of what you are doing
and take the utmost care
when working with the
device. Do not use the
device if you are tired or
you are under the influ-
ence of drugs, alcohol or
medication.
Do not allow the vacuum
•
to come into contact with
people or animals.
While in operation, never
•
aim the suction hose and
nozzles at yourself or oth-
er people; particularly not
eyes or ears. There is a
risk of injury.
The nozzles and suction
•
hose must not be at the
same height as your head
while working. There is a
risk of injury.
Do not vacuum hot,
•
glowing, flammable, ex-
plosive or hazardous
substances. These in-
clude hot ashes, petrol,
solvents, acids or alkalis
amongst others. Risk of
fire and injury.
Make sure not to damage
•
the power cord by pulling
it over sharp edges,