Setting The Time; Declaration Of Conformity - Nedis Rdfm2225Bk Kurzanleitung

Setting the time

This function is only available in standby mode.
1. Press and hold the scan button A
HH:MM shows on the LCD display A
4
The product automatically returns to standby mode after 15 seconds of
4
inactivity.
2. Press the up or down buttons A
pressing the scan button A
3. Press the up or down buttons A
by pressing the scan button A
Disposal
The product is designated for separate collection at
an appropriate collection point. Do not dispose of the
product with household waste.
For more information, contact the retailer or the local
authority responsible for the waste management.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product RDFM2225BK from our
brand Nedis®, produced in China, has been tested according to all relevant CE
standards and regulations and that all tests have been passed successfully. This
includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable)
can be found and downloaded via:
nedis.com/rdfm2225bk#support
.
8
2 .
67 to set the current hours and confirm by
.
8
67 to set the current minutes and confirm
.
8
9