Switching The Product On/Off; Controlling The Volume - Nedis Rdfm2225Bk Kurzanleitung

Switching the product on/off

Press and hold the power button A
The product automatically enters the standby mode.
4
Entering FM mode and searching for a radio station
1. Press the power button A
2. Extend the antenna A
3. Press the up button A
automatically.
4. Press and hold the up button A
frequency manually.
Saving radio presets
This function is only available in FM mode.
4
1. Press and hold the preset button A
P shows on the LCD display A
4
2. Press the up button A
and press the scan button A
Select pre-stored radio stations
Press the preset button A
By tapping the preset button A
4
and select the station you would like to listen.
Press the favourite preset button 1 A
4
Press the favourite preset button 2 A
4
Presets 3 through 20 do not have a direct preset button.
4

Controlling the volume

Rotate the volume dial A
Controlling the LCD backlight brightness
Press the dim button A
A
2 .
Entering standby mode
Press the power button A
9 to switch the product on or off.
9 to activate FM mode.
1 .
or down button A
7
or down button A
7
e
2 .
or down button A
7
8 to confirm.
to select the pre-stored radio stations.
e
e you will go through your preset channels
5
4
w to adjust the volume to the desired sound level.
r to adjust the backlight brightness of the LCD display
9 to switch the product to standby mode.
8
to search for a station
6
6
.
to select a storage position
6
to select preset 1 directly.
to select preset 2 directly.
to adjust the FM