Mittelmann UniDrive Gebrauchsanleitung Und Prüfbuch Seite 90

The UNIDRIVE working device has been tested and approved as a system in accordance with the Ma-
chinery Directive 2006/42/EC. Every change to the system is life-threatening and leads to the loss of
the approval and the loss of the liability of the manufacturer.
18.2 Associated Documentation
Supplementary to these original operating instructions, all individual operating instructions – especially
warning information – of the components of the UNIDRIVE must be read and understood before com-
missioning.
The individual operating instructions are:
of the guided-type fall arrester including flexible anchor lines in accordance with EN 353-2 with

approval for use over edges and with appropriate connecting element length,
of the full body harness in accordance with EN 361,

of the connecting elements in accordance with EN 362

Original Operating Instructions UNIDRIVE
Page 41