Werbung
Verfügbare Sprachen
Verfügbare Sprachen
refrigerator in order to attain proper performance, dissipation of heat,
maintain efficiency, and low power consumption. Clearance of minimum 2
inches should be maintained at the rear and sides of the unit. And
especially do not obstruct the front hot air outlet frame. (See: "HOW TO
INSTALL")
To attain proper performance, be sure to plug the appliance into a
properly grounded 115/60 Hz outlet.
Do not modify the power cord under any circumstance to allow the unit
to be plugged into a non-grounded outlet. To avoid heat damage to the
power cord, please ensure that it does not come in proximity or in direct
contact with the compressor of the refrigerator.
Please avoid installing the refrigerator in a location where the
appliance will come in contact with water or moisture to minimize rusting of
metal parts.
The refrigerator should not be installed near any heat source or in a
location where it will come in direct contact with the sunlight.
The components, if need to be replaced, should be replaced with like
components, and should be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard and to
minimize the risk of possible ignition and also to decrease the cooling
performance due to incorrect parts or improper service.,
TROUBLESHOOTING GUIDE
WHAT TO DO ...
When the fridge is not in use for a prolonged period:
• Remove the plug from the outlet.
• Remove all contents from the fridge.
• Dry the interior and leave the door open for a few days.
When the refrigerator does not work:
• Check if there is a power failure.
- 11 -
Werbung
